EverFocus ED300 Series Do not expose the camera to humidity and dust, Handle the camera with care

Page 4

Safety Warning

1. Do not expose the camera to humidity and dust.

Moisture can damage the camera and cause the danger of electric shock. If the camera is mountED300 outdoors, a camera housing is requirED300. Do not install the camera at where there is greasy smoke or steam, where the humidity is too high, or where there is a lot of dust to prevent damages to the camera.

2.Do not disassemble the camera.

Do not disassemble the camera body as it is dangerous and may cause the damages to the camera. Refer all servicing to qualifiED300 service personnel.

3. Handle the camera with care.

Be careful when handling the camera, do not drop it or subject it too strong shock or vibration to prevent any damages to it.

4.Do not install the camera near electric or magnetic fields.

InstallED300 the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video image.

1.

Image 4
Contents ED300 Series Page Table of Contents Do not install the camera near electric or magnetic fields Do not expose the camera to humidity and dustDo not disassemble the camera Handle the camera with careCleaning Main Features IntroductionSpecification Major Parts Names and Functions ? Auto Gain Control on/off switch ? Back Light Compensation on/off Switch? Level Volume Control 11 12 Power inputInstallation Instructions Lens Adjustments Adjustments Auto Gain Control AdjustmentEverFocus Electronics Corp