FujiFilm ix-10 manual Installing and removing the SmartMedia card

Page 16

Installing and removing the SmartMedia card

Refer to the following information for installing and removing the SmartMedia card. You must insert the SmartMedia card before you can start taking pictures.

1. Set the main switch to OFF.

2. Open the SmartMedia card cover.

3. Inset the SmartMedia card. Ensure the notched edge is oriented as shown (only use 3.3 V SmartMedia cards).

Notched Edge

4. Closecover.the SmartMedia

8

Image 16

Contents User’s Manual About this manual Declaration of conformity EC Declaration of Conformity Safety and handling precautions Condensation Test Shots Prior to Photography Copyright Making Connections Page Introduction Unpacking the ix-10 Digital CameraFeatures Key features & accessoriesOptional accessories Hardware requirements System requirementsSoftware Requirements Identifying components Front ViewRear view Bottom viewLCD status display Following table explains the meaning of each iconInstalling and removing the SmartMedia card Inserting the batteries Battery display Battery icon MeaningPage Turning the camera on and off Taking pictures Resolution Mode buttonSetting the flash Ix-10 Digital Camera has four flash modes Setting the timer Turn the camera onDeleting images Deleting single imagesDeleting all images Page Page Installing software Driver InstallationConnecting to your PC Connecting to your TV Using the software Page Using the Arcsoft Photo Suite Software Page Troubleshooting Problem Possible cause SolutionPage Specifications Semi-field angle 49 degrees Distortion 2%Warranty