FujiFilm ix-10 manual Turning the camera on and off

Page 20

Turning the camera on and off

Refer to the following to turn the ix-10 Digital Camera on and off:

1. Slide the on/off switch to ON.

2. Check the current settings in the LED status display. (See LED status display on page7.)

3. To turn the camera off, set the main switch to OFF.

Note: If you do not press any button for three minutes, the camera will beep and power off automatically. To turn the camera back on, slide the main switch to OFF, wait for one second, and then switch the camera back on.

12

Image 20

Contents User’s Manual About this manual Declaration of conformity EC Declaration of Conformity Safety and handling precautions Condensation Test Shots Prior to Photography Copyright Making Connections Page Introduction Unpacking the ix-10 Digital CameraOptional accessories Key features & accessoriesFeatures Software Requirements System requirementsHardware requirements Identifying components Front ViewRear view Bottom viewLCD status display Following table explains the meaning of each iconInstalling and removing the SmartMedia card Inserting the batteries Battery display Battery icon MeaningPage Turning the camera on and off Taking pictures Resolution Mode buttonSetting the flash Ix-10 Digital Camera has four flash modes Setting the timer Turn the camera onDeleting images Deleting single imagesDeleting all images Page Page Installing software Driver InstallationConnecting to your PC Connecting to your TV Using the software Page Using the Arcsoft Photo Suite Software Page Troubleshooting Problem Possible cause SolutionPage Specifications Semi-field angle 49 degrees Distortion 2%Warranty