FujiFilm ix-10 manual Taking pictures

Page 21

Taking pictures

Follow these instructions to take a picture with your ix-10 Digital Camera:

	Turn the camera on. When			Power On/off
	1. the green LED indicator	LED Indicator		Power On/off
	1. the green LED indicator	LED Indicator		Switch
	lights, the camera is ready			Switch
	lights, the camera is ready
	to take a picture.

2. Check the current settings in the LCD status display. Refer to page 7 for information on LCD status display icons.

3. Press the mode button to set the image resolution; HI (fine) and LO (standard). Refer to page 14 for information on the mode button.

4. Set the flash mode. (See Setting the flash on page 15 for more information.

5. Press the snapshot button to take the picture. You hear a beep as the picture is taken. The LCD display indicates the number of pictures you have left.

Mode Button

Flash Button

Snapshot Button

13

Image 21

Contents User’s Manual About this manual Declaration of conformity EC Declaration of Conformity Safety and handling precautions Condensation Test Shots Prior to Photography Copyright Making Connections Page Unpacking the ix-10 Digital Camera IntroductionKey features & accessories FeaturesOptional accessories System requirements Hardware requirementsSoftware Requirements Front View Identifying componentsBottom view Rear viewFollowing table explains the meaning of each icon LCD status displayInstalling and removing the SmartMedia card Inserting the batteries Battery icon Meaning Battery displayPage Turning the camera on and off Taking pictures Mode button ResolutionSetting the flash Ix-10 Digital Camera has four flash modes Turn the camera on Setting the timerDeleting single images Deleting imagesDeleting all images Page Page Driver Installation Installing softwareConnecting to your PC Connecting to your TV Using the software Page Using the Arcsoft Photo Suite Software Page Problem Possible cause Solution TroubleshootingPage Semi-field angle 49 degrees Distortion 2% SpecificationsWarranty