FujiFilm ix-10 manual Setting the flash

Page 23

Setting the flash

Follow these instructions to set the flash for the ix-10 Digital Camera:

1.	Turn the camera on. When		Power On/off
1.	the green LED indicator	LED Indicator	Power On/off
	lights, the camera is ready	LED Indicator	Switch
	lights, the camera is ready
	to take a picture.

2. Check the current settings in the LCD status display.

Note: The ‘0000’ indicates that the SmartMedia card is

inserted. A symbol ’ indicates that no SmartMedia is inserted.

Current Flash Setting

3. Press the flash mode button and select the mode you want.

Flash Mode Button

Note: The flash mode button has a response time of 0.4 seconds.

15

Image 23

Contents User’s Manual About this manual Declaration of conformity EC Declaration of Conformity Safety and handling precautions Condensation Test Shots Prior to Photography Copyright Making Connections Page Unpacking the ix-10 Digital Camera IntroductionOptional accessories Key features & accessoriesFeatures Software Requirements System requirementsHardware requirements Front View Identifying componentsBottom view Rear viewFollowing table explains the meaning of each icon LCD status displayInstalling and removing the SmartMedia card Inserting the batteries Battery icon Meaning Battery displayPage Turning the camera on and off Taking pictures Mode button ResolutionSetting the flash Ix-10 Digital Camera has four flash modes Turn the camera on Setting the timerDeleting single images Deleting imagesDeleting all images Page Page Driver Installation Installing softwareConnecting to your PC Connecting to your TV Using the software Page Using the Arcsoft Photo Suite Software Page Problem Possible cause Solution TroubleshootingPage Semi-field angle 49 degrees Distortion 2% SpecificationsWarranty