Minolta Maxxum, Minolta, Dynax 7 manual Turn either control dial to select the shutter speed

Page 34

S MODE

In S mode (shutter priority), you select the shutter speed and the camera automatically sets the aperture for the proper exposure. Use S mode when you want to control the blur caused by subject movement.

1. While pressing the exposure- mode dial lock-release button, turn the exposure-mode dial to S.

• S appears in the naviga- tion display.

appears in the viewfind- er, next to the shutter speed, indicating that the shutter-speed can be changed.

2. Turn either control dial to select the shutter speed.

• The aperture setting changes in 1/2 or 1/3 EV increments depending on the position of the exposure compensation dial. See page 77.

When pressing the shutter-release button part- way down, if the aperture value blinks or the printing reverses, the required setting is beyond the camera’s aperture range. Turn the control dial until the blinking/reversing stops.

(Time exposure) should be used when in the M mode.

S-Mode Flash

1.Follow the steps on the previous page.

2.Raise the built-in flash, or turn the accessory flash on.

appears in the viewfinder when the flash is charged.

 

• Shutter speeds of 1/200 or slower can be selected. However, shutter

 

 

speeds greater than 1/200 can be achieved using high speed sync

 

 

5600HS(D), 3600HS(D), or 5400HS (p. 110).

 

• When the built-in flash is up or an attached accessory flash is on, it

 

 

will fire each time the shutter is released. The camera’s automatic

EXPOSURE

 

flash metering system will ensure proper exposure.

 

 

 

 

 

66

67

Image 34
Contents Page For Proper and Safe USE Table of Contents Appendix Names of Parts Camera BodyControl Panel Navigation Display Top Data PanelQuick Operation ViewfinderSubject as desired If using a zoom lens, rotate the zooming ring to frame yourSet the camera for automatic operation DownBatteries Installing the BatteriesClose the battery-chamber door DoorAttaching the Lens Battery Condition IndicatorsLens Removing the LensClose the back cover Loading FilmInsert film cartridge into the film chamber Slide the back-cover release and open the back coverHolding the Camera Handling the CameraPressing the Shutter-Release Button Taking Pictures in FULL-AUTO Turn the main switch to onRaise the built-in flash Full-Auto Basic Settings Method Segment meteringFocus Lock FocusingFocus Signals Focus is confirmedSpecial Focus Situations Using the BUILT-IN FlashFlash Signals If your subject is near a very bright object or areaAperture ISO Rewinding the FilmFlash Range Lens ShadowingManual Rewind Gently press the manual-rewind buttonLarge icon display Meter-index display Display SelectionDetailed display Exposure-history displayDetailed Display Large Icon DisplayMeter-Index Display Exposure-History DisplayVertical Display Operation DisplayPress the navigation display illu- minator Display Brightness and ContrastDisplay Illumination Display ContrastContinuous Autofocus C Focus ModeAutomatic Autofocus a Single-Shot Autofocus SAF Power Zoom and xi Series Lenses Turn the focus-mode switch to MFManual Focus MF AF to MF AF/MF Control ButtonMF to AF Smooth Focusing Focus AreaWide Focus Area Set the wide/local focus-area switch to wideWhile pressing either the focus-area selector or the spot Local Focus Area Set the wide/local focus-area switch to localPicture How to Lock the Wide Focus Area How to Lock the Local/Spot Focus AreaTurn the wide/local focus-area switch to lock AF IlluminatorComparison of full-auto mode to P program mode While pressing the exposure- mode dial lock-release buttonMode Turn either control dial to select the aperture Mode FlashPA/PS Mode Turn the rear control dial to change the apertureAperture Control Turn either control dial to select the shutter speed Shutter Control Metering in M Mode Manual Shift Select a desired shutter speed and apertureSegment Honeycomb-Pattern Metering Turn the metering-mode switch toSelectable Metering Spot MeteringCenter-Weighted Average Metering Exposure CompensationMeter Index Changing to 1/3 IncrementsIncrement ie +/-3.0EV Set the exposure-compensation dial to the edge of the 1/2EVButton Automatic Exposure Lock AELWhile pressing the AE-lock button, recompose the scene Meter Index When AE-Lock Button is Pressed Spot MeteringBrightness-Distribution Display Turn either control dial to set the desired ISO value Setting the ISO ManuallyOpen the control-panel door and press the ISO button Continuous DriveSELF-TIMER Open the control panel door and press the adjust button0.5, 0.7, 1.0 EV Exposure BracketingTurn the front control dial to set the bracketing increment Normal -0.5EV +0.5EV -1.0EV +1.0EV Compensate the exposures as follows Number Exposures AdjustmentMultiple Exposure Turn the drive-mode lever toFlash Mode Switch FlashRED-EYE Reduction Rear Flash SyncSLOW-SHUTTER Sync Flash CompensationFlash Bracketing Accessory Flash Flash Metering Pre-flash meteringAttach the 5600HSD, 5400HS or 3600HSD and set it to HSS mode HIGH-SPEED SyncNormal Flash Wireless/Remote Flash Turn either control dial and select normal wireless or ratioDetach the accessory flash, then raise the built-in flash HSSSwitching Between Normal WL Flash and Ratio WL Flash Press the AE-lock button to test fire the accessory flashWait until both flash units are fully charged Additional Features PC TerminalDATE/TIME Imprinting Setting the Date/TimeOpen the control-panel door and press the Date button Press the ADJ button DATE/TIME Imprinting EYE-START Using Eye-StartSlide the eye-start switch to on Turn the main switch to on Changing the FormatTime Exposures Bulb Cover the viewfinder with the eyepiece capDEPTH-OF-FIELD Preview Press the depth-of-field preview buttonDiopter Adjustment SETTING/CANCELLING the Audio