Minolta Dynax 7, Minolta, Maxxum manual Press the ADJ button

Page 62

DATE/TIME IMPRINTING

2. Press the ADJ button.

• The date adjust win- dow appears and the year is high-lighted.

3.Turn the front control dial to selected the item you wish to change.

4. Turn the rear control dial to change the value.

5.Repeat steps 3 and 4 until the correct date/time is set.

6.After all items are set, press the shutter-release button partway down. The normal display returns.

When appears at the top right side, it is possible to use the focus-area selector instead of the dial.

If you press the right/left side of the selector, the high-lighted area moves.

If you press the top/bottom side of the selector, the high- lighted value changes.

Display returns to normal when you press the shutter-release button partway down.

After the camera batteries have been installed for two days, a second battery (non-accessable) will have been charged. This second battery will be able to provide power to retain the date/time settings for approximately 6 months should the cam- era’s batteries be removed. After that, this message appears and

the date/time information will not be imprint- ed, and must be set. See pages 121-122 for instructions for setting the date and time.

ADDITIONAL FEATURES

122

123

Image 62
Contents Page For Proper and Safe USE Table of Contents Appendix Names of Parts Camera BodyControl Panel Navigation Display Top Data PanelQuick Operation ViewfinderSubject as desired If using a zoom lens, rotate the zooming ring to frame yourSet the camera for automatic operation DownBatteries Installing the BatteriesClose the battery-chamber door DoorAttaching the Lens Battery Condition IndicatorsLens Removing the LensClose the back cover Loading FilmInsert film cartridge into the film chamber Slide the back-cover release and open the back coverPressing the Shutter-Release Button Handling the CameraHolding the Camera Raise the built-in flash Turn the main switch to onTaking Pictures in FULL-AUTO Full-Auto Basic Settings Method Segment meteringFocus Lock FocusingFocus Signals Focus is confirmedSpecial Focus Situations Using the BUILT-IN FlashFlash Signals If your subject is near a very bright object or areaAperture ISO Rewinding the FilmFlash Range Lens ShadowingManual Rewind Gently press the manual-rewind buttonLarge icon display Meter-index display Display SelectionDetailed display Exposure-history displayDetailed Display Large Icon DisplayMeter-Index Display Exposure-History DisplayVertical Display Operation DisplayPress the navigation display illu- minator Display Brightness and ContrastDisplay Illumination Display ContrastContinuous Autofocus C Focus ModeAutomatic Autofocus a Single-Shot Autofocus SManual Focus MF Turn the focus-mode switch to MFAF Power Zoom and xi Series Lenses MF to AF AF/MF Control ButtonAF to MF Smooth Focusing Focus AreaWhile pressing either the focus-area selector or the spot Set the wide/local focus-area switch to wideWide Focus Area Picture Set the wide/local focus-area switch to localLocal Focus Area How to Lock the Wide Focus Area How to Lock the Local/Spot Focus AreaTurn the wide/local focus-area switch to lock AF IlluminatorMode While pressing the exposure- mode dial lock-release buttonComparison of full-auto mode to P program mode Turn either control dial to select the aperture Mode FlashPA/PS Mode Turn the rear control dial to change the apertureAperture Control Turn either control dial to select the shutter speed Shutter Control Metering in M Mode Manual Shift Select a desired shutter speed and apertureSegment Honeycomb-Pattern Metering Turn the metering-mode switch toSelectable Metering Spot MeteringCenter-Weighted Average Metering Exposure CompensationMeter Index Changing to 1/3 IncrementsIncrement ie +/-3.0EV Set the exposure-compensation dial to the edge of the 1/2EVWhile pressing the AE-lock button, recompose the scene Automatic Exposure Lock AELButton Meter Index When AE-Lock Button is Pressed Spot MeteringBrightness-Distribution Display Open the control-panel door and press the ISO button Setting the ISO ManuallyTurn either control dial to set the desired ISO value Continuous DriveSELF-TIMER Open the control panel door and press the adjust buttonTurn the front control dial to set the bracketing increment Exposure Bracketing0.5, 0.7, 1.0 EV Normal -0.5EV +0.5EV -1.0EV +1.0EV Compensate the exposures as follows Number Exposures AdjustmentMultiple Exposure Turn the drive-mode lever toFlash Mode Switch FlashRED-EYE Reduction Rear Flash SyncSLOW-SHUTTER Sync Flash CompensationFlash Bracketing Accessory Flash Flash Metering Pre-flash meteringAttach the 5600HSD, 5400HS or 3600HSD and set it to HSS mode HIGH-SPEED SyncNormal Flash Wireless/Remote Flash Turn either control dial and select normal wireless or ratioDetach the accessory flash, then raise the built-in flash HSSWait until both flash units are fully charged Press the AE-lock button to test fire the accessory flashSwitching Between Normal WL Flash and Ratio WL Flash Additional Features PC TerminalOpen the control-panel door and press the Date button Setting the Date/TimeDATE/TIME Imprinting Press the ADJ button DATE/TIME Imprinting EYE-START Using Eye-StartSlide the eye-start switch to on Turn the main switch to on Changing the FormatTime Exposures Bulb Cover the viewfinder with the eyepiece capDEPTH-OF-FIELD Preview Press the depth-of-field preview buttonDiopter Adjustment SETTING/CANCELLING the Audio