TROUBLESHOOTING
Problem | Cause | Remedy | See | |
page | ||||
|
|
| ||
No sound is heard | “LFE/BASS OUT” in “SET MENU” is | Set “LFE/BASS OUT” to “SWFR” or “BOTH”. | 80 | |
from the subwoofer. | set to “FRONT” when a Dolby Digital or |
|
| |
| DTS signal is being played. |
|
| |
|
|
|
| |
| “LFE/BASS OUT” in “SET MENU” is | Set “LFE/BASS OUT” to “BOTH”. | 80 | |
| set to “SWFR” or “FRONT” when a 2- |
|
| |
| channel source is being played. |
|
| |
|
|
|
| |
| The source does not contain low- |
|
| |
| frequency signals. |
|
| |
|
|
|
| |
Dolby Digital or DTS | The connected component is not set to | Make an appropriate setting following the operating | — | |
sources cannot be | output Dolby Digital or DTS digital | instructions for your component. |
| |
played. (Dolby Digital | signals. |
|
| |
or DTS indicator in |
|
|
| |
Audio input jack select is set to | Set Audio input jack select to “AUTO”. | 40 | ||
the front panel | ||||
display does not light | “ANALOG”. |
|
| |
up.) |
|
|
| |
|
|
|
| |
A humming sound is | Incorrect cable connections. | Connect the audio cables firmly. If the problem | — | |
heard. |
| persists, the cables may be defective. |
| |
|
|
|
| |
| No connection from the turntable to the | Connect the grounding cable of your turntable to the | 24 | |
| GND terminal. | GND terminal of this unit. |
| |
|
|
|
| |
The volume level is | The record is being played on a turntable | Connect your turntable to this unit through an MC- | 24 | |
low while a record is | with an MC cartridge. | head amplifier. |
| |
being played. |
|
|
| |
|
|
|
| |
The volume level | The component connected to the AUDIO | Turn on the power of the component. | — | |
cannot be increased, | OUT (REC) jacks of this unit is turned |
|
| |
or the sound is | off. |
|
| |
distorted. |
|
|
| |
|
|
|
| |
The sound effect | It is not possible to record the sound effect |
|
| |
cannot be recorded. | with a recording component. |
|
| |
|
|
|
| |
A source cannot be | The source component is not connected to | Connect the source component to the DIGITAL | 22, 24 | |
recorded by a digital | the DIGITAL INPUT jacks of this unit. | INPUT jacks. |
| |
recording component |
|
|
| |
Some components cannot record Dolby |
|
| ||
connected to the |
|
| ||
DIGITAL OUTPUT | Digital or DTS sources. |
|
| |
jack. |
|
|
| |
|
|
|
| |
A source cannot be | The source component is not connected to | Connect the source component to the analog AUDIO | 24 | |
recorded by an | the analog AUDIO IN jacks of this unit. | IN jacks. |
| |
analog component |
|
|
| |
connected to the |
|
|
| |
AUDIO OUT (REC) |
|
|
| |
jacks. |
|
|
| |
|
|
|
| |
The sound field | “MEMORY GUARD” in “SET MENU” | Set “MEMORY GUARD” to “OFF”. | 92 | |
parameters and some | is set to “ON”. |
|
| |
other settings of this |
|
|
| |
unit cannot be |
|
|
| |
changed. |
|
|
| |
|
|
|
|
INFORMATION | ADDITIONAL |
|
|
English