Yamaha RX-V1700 owner manual 37 En, If Warning appears

■If “WARNING” appears

When this unit detects potential problems during the “AUTO SETUP” procedure, “WARNING” appears in the “RESULT:EXIT” display. Check the warning messages to correct your speaker settings.

Note

Warnings differ from errors in that warnings do not cancel the “AUTO SETUP” procedure.

1Make sure the pointer is pointing at “WARNING” and then press ENTER to display the detailed information about the warning.

The number on the right of “WARNING” indicates the number of warning messages.

RESULT:EXIT

.WARNING (3)

RESULT

. SP : 5/4/0.1

.DIST: 4.50/ 6.10m

.LVL : -9.0/ +6.5dB

[SET CANCEL

p p

2Press l / h repeatedly to toggle between the warning displays.

WARNING: W-1

<OUT OF PHASE > Reverse Channel

FL --

CENTER

PL	PR
SL	SR
SBL	SBR
p	[

: Select

: Enter

y

•For details about each warning message, see the “AUTO SETUP” section in “TROUBLESHOOTING” on page 120.

•When the corresponding warning message is not applicable to a speaker, “– –” is displayed instead.

3Press ENTER to return to the top “RESULT:EXIT” display.

PRESET/CH

RESULT:EXIT

		WARNING (3)
	.	RESULT
ENTER		SP	:	5/4/0.1
	.	DIST: 4.50/ 6.10m
A/B/C/D/E	.	LVL : -9.0/ +6.5dB
	.	[
		p	p

AUTO SETUP

PREPARATION

English

37 En