Yamaha RX-V1700 Setting remote control codes, 96 En, Selecting a component to be controlled

REMOTE CONTROL FEATURES

■Selecting a component to be controlled

You can select a component to be controlled independently of the input source selected with the input selector buttons.

Press SELECT k / n repeatedly to select the desired component.

The name of the component to be controlled appears in the display window on the remote control.

SELECT

■Controlling optional components

(Option mode)

“OPTN” is an optional component control area that can be programmed with remote control functions independently from any input source. This area is useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.

To select the option mode, press SELECT n repeatedly until “OPTN” appears in the display window on the remote control.

SELECT

Note

You cannot set a remote control code for the optional area. See page 98 to program buttons operated within this component control area.

Setting remote control codes

You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.

The following table shows the default component (Library: component category) and the remote control code for each input area.

Remote control code default settings

	Library		Default
Input area	(component	Manufacturer
			code
	category)
	TAPE	YAMAHA	2700
	TUNER	YAMAHA	2607
PHONO	TV	–	–
TUNER	TUNER	YAMAHA	2602
CD	CD	YAMAHA	2300
MULTI CH	DVD	YAMAHA	2100
INPUT
V-AUX/	TUNER	YAMAHA	2606
DOCK
CBL/SAT	CABLE	–	–
MD/TAPE	MD	YAMAHA	2500
CD-R	CD-R	YAMAHA	2400
DTV	TV	–	–
VCR 1	VCR	–	–
DVR/VCR2	DVR	YAMAHA	2807
DVD	DVD	YAMAHA	2100

Note

You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is preset as listed above.

In this case, try setting another YAMAHA remote control code.

1Set the operation mode selector to SOURCE and then press an input selector button, or to select the input area you want to set up.

AMP	PHONO	TUNER	CD	MULTI CH IN
SOURCE
	V-AUX/DOCK	CBL/SAT	MD/TAPE	CD-R
TV
	DTV	VCR 1	DVR/VCR 2	DVD

96 En