Yamaha RX-V1700 Audio and video signal flow, 20 En, Audio signal flow Video signal flow

CONNECTIONS

Audio and video signal flow

■ Audio signal flow ■ Video signal flow

InputOutput

HDMI

DIGITAL AUDIO (COAXIAL)

DIGITAL AUDIO (OPTICAL)

AUDIO

Digital output

Analog output

Notes

•2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be output at the HDMI OUT jack only when “SUPPORT AUDIO” is set to “OTHER” (see page 86).

•Audio signals input at the HDMI IN jacks are not output at the analog AUDIO OUT and DIGITAL OUTPUT jacks.

InputOutput

HDMI

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Video conversion (see page 90)

Component interlace/progressive up-conversion (see page 91)

HDMI interlace/progressive up-conversion (see page 91)

Notes

•When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows:

1.COMPONENT VIDEO

2.S VIDEO

3.VIDEO

•The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p. Set “CMPNT I/P” to “ON” in MANUAL SETUP to activate this feature (see page 91).

•Digital video signals input at the HDMI IN 1 or HDMI IN 2 jack cannot be output from analog video output jacks.

•The analog component video signals with

480i (NTSC)/576i (PAL) of resolution are converted to the s-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.

•Component interlace/progressive conversion (see page 91) and HDMI interlace/progressive up-conversion (see page 91) are available only when “V CONV.” is set to “ON” (see page 90).

•Use the “HDMI I/P” parameter in “OPTION MENU” to deinterlace the analog video signals output at the HDMI OUT jack (see page 91). When the analog video signals with 1080i or 720p of resolution are up-converted to HDMI and output at the HDMI OUT jack, the picture quality may worsen.

•The OSD signal is not output at the VCR 1 OUT and DVR/VCR 2 OUT jacks and is not recorded.

•The color of the letters and images in the OSD may differ depending on the input signals and your video monitor.

20 En