Yamaha RX-V1700 Macro ON/OFF, Standby, Power, Audio SEL, Sleep, Multi CH, Amp, Source, Volume +

Page 9

0MACRO ON/OFF

Turns on or off the macro function (see page 100).

AMACRO

Programs a series of operations to be controlled with a single button (see page 100).

BSTANDBY

Sets the main zone to the standby mode (see page 31).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

CPOWER

Turns on the main zone (see page 31).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

DAUDIO SEL

Toggles the priority for the type of audio input jack between “AUTO”, “HDMI”, “COAX/OPT” and “ANALOG” when one component is connected to two or more input jacks (see page 40).

ESLEEP

Sets the sleep timer (see page 43).

FMULTI CH IN

Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 41).

GSELECT k / n

Selects another input source that you can control independently of the input source selected with the input selector buttons.

HOperation mode selector

Selects the operation mode of the remote control buttons in the shaded area.

AMP

Operates the amplifier function of this unit.

SOURCE

Operates the component selected with an input selector button (see page 95).

TV

Operates the TV assigned to either DTV or PHONO (see page 94).

Notes

•To set the remote control codes for other components, see page 96.

•When you set the remote control codes for both DTV and PHONO (see page 96), priority is given to the one set for DTV.

CONTROLS AND FUNCTIONS

IVOLUME +/–

Increases or decreases the volume level.

JMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 41).

KPURE DIRECT

Turns on or off the pure direct mode (see page 50).

LSET MENU

Enters “SET MENU” (see page 79).

MPARAMETER

Displays sound field parameter settings in the on-screen display (OSD) (see page 69).

NSTRAIGHT

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 49).

OEXTD SUR.

Switches between 5.1 and 6.1/7.1-channel playback of multi-channel sources (see page 73).

PSELECT

Selects decoders for 2-channel sources (see pages 73 and 75).

QENHANCER

Turns on or off the Compressed Music Enhancer mode (see page 52).

RNIGHT

Turns on or off the night listening modes (see page 53).

SRENAME

Changes the name of the input source in the display window (see page 99).

TCLEAR

Clears remote control functions acquired from the learn, macro and/or rename features (see page 103).

ULEARN

Programs remote control codes of functions from other remote controls (see page 98).

INTRODUCTION

English

7 En

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RX-V1700 Special Instructions for U.K. Model For U.K. customersContents Features Getting Started Supplied accessoriesCheck that you received all of the following parts About this manualFront panel Controls and FunctionsOpening and closing the front panel Door Remote control controls and functions Remote controlLevel ReturnVolume + PowerMacro ON/OFF MacroID1/ID2 switch Zone 2/Zone 3 remote controlVolume + Zone 2/ZONE 3 switchInstalling batteries in the remote control Preparing the remote controlUsing the remote control Remote control sensor Approximately 6 m10 En Front panel display11 En EONPTY Hold 12 En Rear panelWrench Holder Voltage SelectorConnections Placing speakers13 En 14 En Connecting speakersSubwoofer Surround back speakers Left Right Center speaker15 En Connecting the speaker cableConnecting to the SP2 speaker Terminals Connecting the banana plug16 En Models17 En Conventional connectionBi-amplification connection 18 En Information on jacks and cable plugsAudio jacks Video jacks19 En Information on HdmiHdmi compatibility with this unit Hdmi jack and cable plugAudio signal flow Video signal flow Audio and video signal flow20 En InputOutput21 En Connecting a TV monitor or projectorConnecting a DVD player Connecting other components22 En DVD playerConnecting set-top boxes Connecting a DVD recorder, PVR or VCR23 En DVD recorder, PVR or VCR24 En Connecting audio componentsCD recorder Turntable25 En Connecting an external amplifier26 En Connecting a multi-format player or an external decoderFor 6-channel input For 8-channel inputUsing the Video AUX jacks on the front panel 27 EnGame console or Video camera 28 En Connecting the AM loop antennaConnecting the AC power cable Connecting the power cable29 En Asia and General models only30 En Setting the speaker impedanceWhen all connections are complete, turn on this unit Turning on and off the powerFront panel Remote control 31 EnUsing Auto Setup Auto Setup32 En Omni-directional microphoneSET Menu Automenu33 En Autocheck Resultexit34 En Resultwiring 35 EnResults of the speaker Output level Error If an error screen appears36 En If Warning appears 37 EnPlayback Basic procedure38 En Turn on the video monitor connected to this unit39 En Guide to contentsSelecting audio input jacks 40 EnAuto Selecting the Multi CH Input component Using your headphonesMuting the audio output 41 EnInformation Displaying the input source42 En Audio informationCanceling the sleep timer Using the sleep timerPlaying video sources 43 EnSound Field Programs Front panel operations Remote control operationsSelecting sound field programs 44 En45 En Sound field program descriptionsFor music audio sources ClassicalFor various sources 46 EnLIVE/CLUB EntertainmentFor visual sources of music 47 EnFor movie sources Movie48 En Stereo playbackStereo Enjoying unprocessed input sources Deactivating the Straight modeStraight 49 EnEnjoying pure hi-fi sound Adjusting the tonal quality Using Audio Features50 En Bypassing the tone control circuitryEnjoying multi-channel sources in 2-channel stereo Adjusting the speaker level51 En Press Parameter and then l / h to set the Direct parameterMusic Enhancer Selecting the Compressed Music Enhancer mode52 En Following display is shown in the OSD53 En Selecting the night listening modeFM/AM controls and functions FM/AM Tuning54 En Front panel functions55 En Remote control functions56 En Automatic tuning57 En Manual tuning58 En Automatic preset tuningPress and hold Memory for more than SecondsManual preset tuning 2,559 En 60 En Selecting preset stationsExchanging preset stations 2,461 En Displaying the Radio Data System information Radio Data System Tuning Europe Models only62 En Frequency displayNews Press PRESET/CH k / n on the remote63 En Control to select the desired program typePOP M 64 En65 En Controlling iPod in the menu browse Mode Controlling iPod in the simple remote ModeControlling iPod 66 EnFollowing display appears in the OSD 67 EnShuffle Shuffle Repeat Repeat68 En RecordingChanging sound field parameter settings Advanced Sound Configurations69 En Press h to increase the value Press l to decrease the valueSound field parameter descriptions 70 EnDSP Level INIT.DLY71 En Room Size P.ROOM Size S.ROOM Size SB Room SizeLiveness S.LIVENESS SB Liveness 72 En REV.DELAYREV.TIME REV.LEVELPress Select on the remote control Sources surround decode mode73 En Selecting decoders for 2-channelDecoder descriptions 74 EnSurround Decode PRO Logic Surround DecodeSelecting decoders used with sound Field programs 75 EnDecoder parameter descriptions Available decodersSelecting decoders for multi-channel Sources 76 EnAuto Auto DecodersAuto setup Auto Setup Customizing this Unit Manual SetupManual setup Manual Setup 77 En78 En Signal information Signal InfoPress k / n to select Manual Setup Using SET MenuPress Enter to enter Manual Setup 79 EnBlfe Level Speaker settings Aspeaker SETBasic Menu LFE/BASS OUT81 En Center SPCenter speaker Center SP SpeakerPresence SP 02ASUBWOOFER PhaseCross Over PriorityCSP Distance BSP Level83 En Speaker level BSP LevelAequalizer Dtest Tone84 En Equalizer select SelectCdynamic Range 85 EnLow-frequency effect level Daudio SET Audio settings Daudio SETEhdmi SET 86 EnCoaxial CMPNT-V Input87 En Input/output assignmentHdmi Optical OUTCinput Rename 88 EnDdecoder Mode Cvolume TrimMulti channel input Setup Emulti CH SETDisplay settings Adisplay SET Adisplay SET90 En 91 En Caudio Select Bmemory GuardEPARAM. INI 92 EnFzone SET Gdock SET93 En Controlling this unit, a TV, or other components Remote Control Features94 En Controlling this unitControlling other components 95 EnControlling optional components Option mode Setting remote control codesRemote control code default settings 96 En97 En Press Learn again to exit from the setup modePress Enter Press Enter to set the number98 En Remote controlsPress Rename using a ballpoint pen or similar object Press Learn again to exit the learning modeChanging source names in the display window 99 EnMacro programming features 100 EnMacro operations Default macro functions 101 EnFirst Second Third Programming macro operations 102 EnPress k / n to select the clear mode Clearing configurations103 En Clearing function setsClearing a learned function 104 EnSelected component name appears in the display window Press Learn again to exitPress Macro again to exit the macro programming mode 105 EnClearing a macro function Connecting the Zone 2 and Zone 3 components Using MULTI-ZONE ConfigurationUsing external amplifiers 106 EnControlling Zone 2 or Zone Using the internal amplifiers of this unit107 En Selecting Zone 2 or ZoneSelecting the input source of Zone 2 or Zone 108 EnAdjusting the volume level of Zone 2 or Zone Adjusting the tonal quality of Zone 2 or Zone109 En Advanced Setup Using Advanced Setup110 En 111 En Video reset Video Reset Setting remote control IDSetting remote control AMP ID 112 EnRemote control AMP codes Setting remote control tuner IDOK appears in the display window if setting was successful 113 En114 En Remote control tuner codesControl Tuner IDTroubleshooting 115 EnGeneral 116 En 117 En Tuner 118 EnHdcp Error Remote control119 En Device OverBefore Auto Setup 120 EnIPod During Auto Setup After Auto Setup121 En 122 En Resetting the System123 En Glossary124 En Video signal 125 EnSampling frequency and number Quantized bits 126 En Sound Field Program InformationElements of a sound field Sound output from each speaker127 En Parametric Equalizer InformationFrequency Factor128 En SpecificationsGeneral 129 EnAPPENDIX-i Sound Output in Each Sound Field ProgramAPPENDIX-ii Channel audio 6.1-channel Monaural StereoAudio *2 Audio *3 Surround Decode APPENDIX-iiiAPPENDIX-iv Cable CD Player APPENDIX-vCD Recorder DVD PlayerAPPENDIX-vi APPENDIX-vii VCR APPENDIX-viiiWH63590
Related manuals
Manual 3 pages 53.38 Kb
Top Page Image Contents