Chapter 9
Connecting the Camera Dock 6000
After the Kodak EasyShare software is loaded (see page 57), connect the camera dock to your computer and to a power outlet. You need:
!The USB cable included with your camera
!The AC adapter,
IMPORTANT: Make sure your camera is NOT in the camera dock when you are connecting to power and the computer.
1Plug the labeled 
end of the USB cable into the labeled USB port on your computer.
See your computer user’s guide for details.
2 Plug the other end of the USB cable into the square USB connector on the back of the camera dock.
3Plug the AC adapter into the round power connector on the back of the camera dock
and into a power outlet.
Your AC adapter may differ from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet.
IMPORTANT: Use only the AC adapter,
Leave the camera dock connected so it’s always ready to transfer pictures and videos.
65