Sennheiser W300 manual Attaching the microphones, Positioning the microphones

Page 16

Attaching the microphones
Use the microphone clips	to attach the ME 2 and ME 4 clip-on

microphones to clothing (e.g. tie, lapel).

Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.

Positioning the microphones

The ME 3 and ME 4 microphones are directional microphones, i.e. their sound inlet should always be directed towards the sound source (e.g. mouth).

The ME 2 with omni-directional pick-up pattern picks up sound equally from all directions. It is the best choice if movements of the speaker’s head have to be compensated for. However, it should be attached as close as possible to the sound source.

Adjust the sensitivity correctly for all microphones/usages (see “Adjusting the sensitivity (transmitters only)“ on page 30).

Attaching the bodypack transmitter to clothing

The bodypack transmitter is attached to clothing (e.g. belt, waistband) with the supplied belt clip.

The clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round.

The BPP 1 bodypack pouch (available as an accessory) helps to protect the bodypack transmitter against moisture.

16

Image 16

Contents W300 Thank you for choosing Sennheiser Contents Evolution wireless series ew 300 G2 Channel bank systemSafety instructions System variantsAreas of application Delivery includesOverview of operating controls EM 300 G2 rack-mount receiverSK 300 G2 bodypack transmitter SKM 300 G2 radiomicrophone Transmitter battery status indication Indications and displays on the receiverMute display Modulation displayOperation and battery status indication Indications and displays on the transmittersDiversity display Button backlightingAF peak indication SK 300 G2 only Display backlightingConnecting the antennas Connecting the mains unitPreparing the components for use Mounting the receiver feet Service interface Connecting the amplifier/mixing console Rack adapter and antenna mount Bottom sides of the receivers Inserting and replacing the batteries Connecting the microphone/line cableInserting and charging the accupack Positioning the microphones Attaching the microphonesAttaching the bodypack transmitter to clothing Changing the microphone head Using the components Switching the components on/offSwitching the rack-mount receiver on/off Switching the bodypack transmitter on/offActivating/deactivating the lock mode Muting the transmittersMuting the SK 300 G2 bodypack transmitter Muting the SKM 300 G2 radiomicrophoneButtons Operating menuOverview of menus Adjusting a setting Storing a settingWorking with the operating menu Getting into the operating menuExiting the operating menu MHz Operating menu of the receiver01 786.300 MHz Low High Main FrequencyPilot OffExit Operating menu of the transmittersBank Switching between channel banks Adjustment tips for the operating menuSwitching between the channels in a channel bank Scanning the channel banks for free channels EM 300 G2 only Displaying the last scan resultStarting the scan Releasing locked channelsAdjusting the sensitivity transmitters only Multi-channel operationAdjusting the squelch threshold EM 300 G2 only Adjusting the audio output level EM 300 G2 onlyIMPORTANT! Notes Selecting the standard display EM 300 G2 rack-mount receiverLoading the factory-preset default settings Entering a nameAdjusting the contrast of the graphic display EM 300 G2 only Exiting the operating menuIf problems occur Error checklistRecommendations and tips Care and maintenance For multi-channel operationAdditional information Wireless transmission systemsHDX noise reduction Squelch Diversity receptionPilot tone squelch Field strength-dependent squelchSystem SpecificationsReceiver Onnector assignment TransmittersMicrophones Microphone headsPage Accessories Warranty regulations Manufacturer declarationsCE Declaration Conformity Batteries or rechargeable batteries