Sennheiser W300 Indications and displays on the receiver, Transmitter battery status indication

Indications and displays on the receiver

Transmitter battery status indication

The 4-step transmitter battery status display on the receiver display panel provides information on the transmitter’s remaining battery/accupack BA 2015 capacity:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %
Battery icon flashing:	LOW BAT
	In addition, the text “LOW BAT” (backlit in red)
	flashes in alternation with the standard display.
“MUTE” display
The “MUTE” display	appears on the display panel and the backlighting of

the standard display switches from green to red. In addition, the text “MUTE” flashes in alternation with the standard display when

ythe RF signal of the received transmitter is too weak,

ythe received transmitter has been muted (with the pilot tone transmission or evaluation activated).

Modulation display

The level display for audio signal “AF” shows the modulation of the received transmitter.

When the transmitter’s audio input level is excessively high (AF peak), the receiver’s level display for audio signal “AF” shows full deflection.

When the transmitter is overmodulated frequently or for an extended period of time, the text “PEAK” (backlit in red) flashes in alternation with the standard display.

“PILOT” display
The “PILOT” display	lights up when the pilot tone evaluation is activated

(see “Activating/deactivating the pilot tone transmission or pilot tone evaluation“ on page 33).

9