Sennheiser W300 manual Using the components, Switching the components on/off

Page 18

Using the components

Switching the components on/off

ew 300 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button (receiver) or the ON/OFF button (transmitters) serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display.

Note:

Remove the batteries or the accupack when the units will not be used for extended periods of time.

Switching the rack-mount receiver on/off

Press the ON button

to switch the receiver on.

To switch the receiver off, press the ON button until “OFF” appears on the display.

Switching the bodypack transmitter on/off

Press the two unlocking buttons

and open the battery compartment

cover .

 

Press the ON/OFF button

to switch the bodypack transmitter on. The

red LED lights up.

 

 

To switch the bodypack transmitter off, press the ON/OFF button

until

“OFF” appears on the display. The red LED goes off.

 

Close the battery compartment. The battery compartment cover

locks

into place with an audible click.

 

Switching the radiomicrophone on/off

Turn the protective cap at the bottom of the radiomicrophone so that the ON/OFF button becomes accessible.

Press the ON/OFF button to switch the radiomicrophone on. The red LED lights up.

To switch the radiomicrophone off, press the ON/OFF button

until

“OFF” appears on the display. The red LED goes off.

 

18

Image 18
Contents W300 Thank you for choosing Sennheiser Contents Evolution wireless series ew 300 G2 Channel bank systemAreas of application Safety instructionsSystem variants Delivery includesOverview of operating controls EM 300 G2 rack-mount receiverSK 300 G2 bodypack transmitter SKM 300 G2 radiomicrophone Mute display Transmitter battery status indicationIndications and displays on the receiver Modulation displayDiversity display Operation and battery status indicationIndications and displays on the transmitters Button backlightingAF peak indication SK 300 G2 only Display backlightingPreparing the components for use Connecting the antennasConnecting the mains unit Mounting the receiver feetConnecting the amplifier/mixing console Service interfaceRack adapter and antenna mount Bottom sides of the receivers Connecting the microphone/line cable Inserting and replacing the batteriesInserting and charging the accupack Attaching the microphones Positioning the microphonesAttaching the bodypack transmitter to clothing Changing the microphone head Switching the rack-mount receiver on/off Using the componentsSwitching the components on/off Switching the bodypack transmitter on/offMuting the SK 300 G2 bodypack transmitter Activating/deactivating the lock modeMuting the transmitters Muting the SKM 300 G2 radiomicrophoneOperating menu ButtonsOverview of menus Working with the operating menu Adjusting a settingStoring a setting Getting into the operating menuExiting the operating menu Operating menu of the receiver MHz01 786.300 MHz Low High Main FrequencyPilot OffExit Operating menu of the transmittersBank Adjustment tips for the operating menu Switching between channel banksSwitching between the channels in a channel bank Starting the scan Scanning the channel banks for free channels EM 300 G2 onlyDisplaying the last scan result Releasing locked channelsAdjusting the sensitivity transmitters only Multi-channel operationAdjusting the audio output level EM 300 G2 only Adjusting the squelch threshold EM 300 G2 onlyIMPORTANT! Notes Selecting the standard display EM 300 G2 rack-mount receiverLoading the factory-preset default settings Entering a nameAdjusting the contrast of the graphic display EM 300 G2 only Exiting the operating menuIf problems occur Error checklistRecommendations and tips Care and maintenance For multi-channel operationWireless transmission systems Additional informationHDX noise reduction Pilot tone squelch SquelchDiversity reception Field strength-dependent squelchSpecifications SystemReceiver Microphones Onnector assignmentTransmitters Microphone headsPage Accessories CE Declaration Conformity Warranty regulationsManufacturer declarations Batteries or rechargeable batteries