Sennheiser W300 manual Specifications, System, Receiver

Specifications

System

RF characteristics Modulation Frequency ranges Transmission/receiving frequencies

Switching bandwidth

Nominal/peak deviation

Frequency stability

AF characteristics Noise reduction system AF frequency response

S/N ratio (at 1 mV and peak deviation) THD (at nominal deviation and 1 kHz)

General data Temperature range Dimensions of carrying case [mm] Weight of carrying case

Receiver

wideband FM

518–554, 626–662, 740–776, 786–822, 830–866 MHz 8 channel banks with 8 factory-preset channels each

1 channel bank with 8 freely selectable channels

(1440 frequencies, tunable in steps of 25 kHz)

36 MHz

±24 kHz/±48 kHz

≤±15 ppm

Sennheiser HDX

40–18,000 Hz

≥112 dB(A) ≤0.9 %

–10 °C to +55 °C

380 x 370 x 70 approx. 3100 g

RF characteristics	EM 300 G2
Receiver principle		true diversity
Sensitivity (with HDX, peak deviation)		< 2.5 μV at 52 dBArms S/N ratio
Adjacent channel rejection		≥ 68 dB
Intermodulation attenuation		≥ 68 dB
Blocking		≥ 72 dB
Squelch		4 steps: Off
		Low:	5 dBμV
		Mid:	15 dBμV
		High: 25 dBμV
Pilot tone squelch		can be switched off
Antenna inputs		2 BNC sockets
AF characteristics
AF output voltage (at peak deviation 1 kHzAF)		¼’’ (6.3 mm) jack socket (unbalanced):		+12 dB
				u
		XLR socket (balanced):		+18 dBu
Overall device
Power supply		10.5 – 16 V DC, nominal voltage 12 V DC
Power consumption		approx. 200 mA
Dimensions [mm]		212 x 145 x 38
Weight		approx. 1100 g

40