Date and Time Display
Install the Clock Lithium Cell
The clock cell indicator 
flashes for a few seconds in the viewfinder when you turn on the camcorder if the cell is not installed or needs replacing.
Insert Object Here to Remove Cell
Clock Cell
(+ Side Facing Out)
Clock Cell
Compartment
VCR
POWER OFF CAMERA
1.Make sure camcorder is turned off, and remove any power supply attached to the camcorder.
2.Press release tab of clock cell compartment cover and open the compartment.
3.Insert the clock cell with the “+” terminal facing out, and press it in.
4.Close the compartment cover. It clicks into place.
To Remove Lithium Cell
To remove battery, insert a pointed nonmetallic object between battery and compartment and lift.
Cautions: Lithium cell battery. Replace only with
Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical burn if mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short the + and – sides of the cell.
17