Recording
Time-Lapse Recording (continued)
6.Rotate the MENU dial to highlight the desired time between recordings (15S, 30S, 1 MIN, or 5 MIN).
•Select 15S to delay the recording for 15 seconds.
•Select 30S to delay the recording for 30 seconds.
•Select 1MIN to delay the recording for one minute.
•Select 5MIN to delay the recording for five minutes.
•Select OFF if you do not want the camcorder to delay recording.
7.Press the MENU dial in to display the second MENU. Rotate the MENU dial to highlight REC TIME.
BACK | OFF | |
REC TIME |
| |
INT. TIME |
| OFF |
TALLY LAMP | ON | |
CHARACTER | 07 | |
JLIP ID NO. | ||
DEMO MODE | OFF | |
MENU END |
| |
8.Press the MENU dial in to display the REC TIME menu.
REC TIME
OFF 1/4 S 1/2 S
1S
5S
EXIT
9.Rotate the MENU dial to highlight the amount of time you want the camcorder to record.
•Select 1/4S to record for 1/4 second.
•Select 1/2S to record for 1/2 second.
•Select 1S to record for one second.
•Select 5S to record for five seconds.
•Select OFF if you do not want to record for a selected amount of time.
10.Press the MENU dial twice to exit the menus.
and the amount of recording time
and 
and the amount of interval time between recordings appear in
the viewfinder.
15S 
5S
11.Press the thumb trigger to start recording.
Note: The camcorder starts and stops recording the selected amount of time. The tally light flashes with the flash speed increasing five seconds before recording begins.
12.To stop recording, place the camcorder in
Note: Fade does not operate during animation or
53