Power Your Camcorder
Use the Battery to Power Your Camcorder (continued)
CAMERA/
OFF/VCR
Switch
BATTERY
EJECT
Button
Rechargeable
Battery
Hold Battery
Flush and
Slide Down
Attach the Charged Battery
If the DC cable is attached to the camcorder, remove it before attaching the battery.
1.Align the reference arrow on the battery to the arrow on the back of the camcorder.
2.Hold the battery flush against the camcorder while sliding it down in the direction of the arrow.
3.Press and hold the small button on the CAMERA/OFF/VCR switch while you slide it to CAMERA.
Remove the Battery
1.Set the CAMERA/OFF/VCR switch to OFF.
2.Press and hold the BATTERY EJECT button and remove the battery.
ATTENTION: LEAD ACID BATTERY MUST BE DISPOSED OF PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED USES A RECHARGEABLE BATTERY. AT THE END OF ITS USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL.
Pb |
12