Playback
Playback Operation and How to Copy Tapes on the VCR
1.A. Camcorder connected directly to TV: Turn on the TV and tune it to the video input channel.
B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR.
2.Press and hold the small button on the CAMERA/OFF/VCR switch while you slide it to VCR.
Note: The camcorder only plays back tapes recorded in the SP speed.
3.Press PLAY.
•During playback, use the playback features on pages
4.To copy what the camcorder is playing, place a blank cassette in the VCR, and press the VCR’s RECORD button.
Note: Make sure the
5.Press STOP/EJECT when you are finished.
Viewing What the Camcorder is Seeing (or Recording)
1.A. Camcorder connected directly to TV: Turn on the TV, and tune it to the video input channel.
B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR.
2.Press and hold the small button on the CAMERA/OFF/VCR switch while you slide it to CAMERA.
Note: Turn the TV’s volume down to prevent a
3.Press the REC/PAUSE button to begin recording. You can watch what the camcorder is seeing (or recording) on the TV screen.
Caution: The unauthorized recording of copyrighted material may infringe the rights of others.
37