RCA CC4251 manual Trouble Checks and Adjustments

Trouble Checks

If you’re having trouble with your camcorder, you probably can correct the problem yourself. Before you take your camcorder to an Authorized RCA Camcorder Service Center or call a service person, use the chart below. Find the problem and try the adjustment(s) that is listed to the right.

If service should be necessary, read your warranty to find out what is covered and how to get service.

Trouble	Checks and Adjustments
No power	• Press and hold the small button while you place the
		CAMERA/OFF/VCR switch to CAMERA or VCR.
	• If using battery, it might need to be recharged.
	• If using AC adapter/charger, make sure it is plugged
		into a working outlet.
Won’t record or	• If using AC adapter/charger, make sure it is plugged
play back		into a working outlet.
	• Make sure CAMERA/OFF/VCR switch is set to correct
		position for desired operation.
	• There might not be a cassette in the camcorder.
	• Try ejecting and reinserting the cassette.
	• The cassette tape might be broken, try another cassette.
	• You may have reached the end of the cassette, try
		rewinding it.
	• Moisture condensation might cause the tape to stick to
		the headwheel and damage the headwheel or tape. Give
		the camcorder 2 or 3 hours to reach a stable temperature
		before reinserting a cassette.
Won’t play back	• Set CAMERA/OFF/VCR switch to VCR position.
Won’t record	•	Safety tab is removed. See page 16.
	• Set CAMERA/OFF/VCR switch to CAMERA.
No picture	•	Remove lens cap.
Camcorder turns	• Set CAMERA/OFF/VCR switch to OFF and then
off		CAMERA or VCR to turn back on. If camcorder is left
		in record-pause or play-pause for several minutes, it
		turns off to prevent tape wear.

48