Recording
Viewfinder Displays (continued)
Tape Counter (0000M) with Memory Stop
Press the DISPLAY button to display the tape counter. The tape counter helps locate segments of tape.
•Whenever the tape counter is displayed, the
•Details are on page 28.
Tape Warnings (TAPE, NO TAPE, and
TAPE END)
•TAPE flashes when you try to record with the safety tab removed.
•TAPE flashes when a damaged tape is inserted. Remove the tape and replace it with a new one.
•NO TAPE flashes when you try to record with no cassette inserted.
•TAPE END flashes when there is approximately five minutes recording time left on the tape.
•TAPE END briefly appears when you reach the end of the cassette during recording.
Time and Date Display
Press the DATE/TIME button to display the time and date, AUTO date, auto TITLE, date only, or no date when the camcorder is in
•These displays are recorded on the tape when they appear in the viewfinder.
•Details are on pages
Tape-Remaining Indicator ()
Press the DISPLAY button to display the
Zoom ( ) and ZOOM Indicators
•The zoom indicator ( ) appears when you use the power zoom
buttons (T and W).
•ZOOM appears when you zoom more than 16 times.
•Details are on pages 27.
23