First-Time Operation
2. Attach the adapter/charger.
To AC 120V,
50/60 Hz
|
| DC |
POWER |
| OUTPUT |
| CHARGE | |
|
| Jack |
Adapter/
Charger
DC Cable
Since the battery must be charged before it can be used the first time, attach the adapter/charger to the camcorder.
1.Attach one end of the adapter/ charger’s DC cable to the DC OUTPUT jack on the side of the
adapter/charger.
DC IN 9.6V
Jack
2.Attach the other end of the cable to the DC IN 9.6V jack on the camcorder.
3.Plug the adapter/charger’s plug into an operating outlet.
4.Details are on page 10.
3.Adjust the handstrap, remove lens cap, and attach it to the handstrap.
POWER
CHARGE
1.Open the handstrap, insert your hand, and adjust the handstrap to fit your hand.
Lens Cap on
Handstrap
Handstrap
2.Remove the lens cap and attach it to the handstrap where shown.
4