RCA CC4251 manual Chart of Characters in Titler’s Register, To Create a Title, To Correct an Error

Recording

Titler (continued)

To Create a Title

1.Attach a power source to the camcorder. Press and hold the small button on the CAMERA/OFF/VCR switch while you set it to CAMERA.

2.Press TITLER to display the titler graphics in the viewfinder. A flashing cursor appears.

3.Press EDIT-ADVto move the flashing cursor to the place you want to begin your title.

4.Select the first character for your title by pressing the + or – button until the character you want appears in the viewfinder.

See the chart below for the characters available.

5.After you have selected the first character, press EDIT-ADVto move the flashing cursor where you want the next character to appear.

6.Repeat steps 4 and 5 until you have completed the title.

7.When you are finished, press TITLER to store the title and remove the title graphics from the viewfinder.

Remember: Remove the titler graphics from the viewfinder for normal recording.

To Correct an Error

1.Press TITLER to display the titler graphics in the viewfinder.

2.Press EDIT-ADVto move the flashing cursor over the character you want to correct.

3.Press the + or – button until the correct character appears.

Note: If you want to delete a character, press + or – until the blank space appears.

Chart of Characters in Titler’s Register

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ‘ . / ,

– ; : < > ! (BLANK)

31