Yamaha RX-V1500 owner manual Features, Built-in 7-channel power amplifier, Sound field features

Page 4

FEATURES

Built-in 7-channel power amplifier

◆Minimum RMS output power (0.04% THD, 20 Hz – 20 kHz, 8 Ω)

Front: 120 W + 120 W

Center: 120 W

Surround: 120 W + 120 W

Surround Back: 120 W + 120 W

Sound field features

◆Proprietary YAMAHA technology for the creation of sound fields

◆THX Select

◆Dolby Digital/Dolby Digital EX decoder

◆DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6 decoder, DTS 96/24

◆Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx Decoder

◆Virtual CINEMA DSP

◆SILENT CINEMA™

Sophisticated AM/FM tuner

◆40-station random access preset tuning

◆Automatic preset tuning

◆Preset station shifting capability (preset editing)

◆RDS: Radio Data System receiving capability (U.K. and Europe models only)

Other features

◆YPAO: YAMAHA Parametric Room Acoustic Optimizer for automatic speaker setup

◆192-kHz/24-bit D/A converter

◆SET MENU to optimize this unit for your audio/video system

◆6 or 8-channel additional input jacks for discrete multi channel input

◆On-screen display function helpful in controlling this unit

◆PURE DIRECT for pure fidelity sound with analog and PCM sources

◆S-video signal input/output capability

◆Component video input/output capability

◆Video signal conversion (composite video ↔ S-video → component video) capability for monitor out

◆Optical and coaxial digital audio signal jacks

◆Sleep timer

◆Cinema and music night listening mode

◆Remote control with preset remote control codes and learning/macro capability

◆Zone 2/Zone 3 custom installation facility

(U.S.A., Canada, U.K., Europe and Australia models only)

•y indicates a tip for your operation.

•Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

•This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA CORPORATION.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.

THX and the THX logo are registered trademarks of THX Ltd. Surround EX is a jointly developed technology of THX and Dolby Laboratories, Inc. and is a trademark of Dolby Laboratories, Inc. All rights reserved. Used under authorization.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RX-V1500 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 7-channel power amplifierSound field features Other featuresInstalling batteries in the remote control Supplied accessoriesGetting Started Controls and Functions Front panelEurope models only Opening and closing the front panel DoorRemote control AMP/SOURCE/TV MuteSET Menu NightHandling the remote control Using the remote controlApproximately 6 m 20 ft Front panel display 96/24 indicator LFE indicatorInput channel indicators Presence and surround back speaker indicatorsAC Outlets Rear panelVoltage Selector Speaker Setup Speaker placementDi-pole speaker layout Speaker connections10 mm 3/8 Connecting to PRESENCE/ZONE 2 or Presence speaker terminals Tighten the knob to secure the wireBanana plug connections Speaker terminal wrench Red positive + Black negativeSUB Woofer Front terminals Center terminalsSurround terminals Subwoofer jackConnections Cable indicationsAnalog jacks Digital jacksConnecting video components Connections for DVD playbackDVD player A. model Video MonitorFor 6-channel input Connecting to the Multi CH Input jacksMulti-format player External decoder Connections for other video components Video AUX jacks on the front panelUse these jacks to connect any video source, such as Game console or camcorder, to this unitConnecting a turntable Connecting audio componentsConnections for audio components Connecting to an external amplifier Connecting the antennas Connecting the AM loop antennaFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapter U.K. model onlyConnecting the power supply cord Other modelsAsia and General models only Memory back-upSpeaker impedance setting Turning on the powerPress STANDBY/ON to exit the setting SP IMP . SETOptimizer microphone setup Auto SetupIntroduction Automenu Starting the setupSET Menu If you selected Auto in step If you selected Step in stepIf you selected Reload in step Press n to select Start Push i, then press hBefore auto setup Troubleshooting for auto setup procedureDuring auto setup After auto setup 1OUT of Phase3LEVEL Error 4SWFR PhaseBasic Setup Using Basic MenuBasic Menu 1/2 Press n to select SWFR, then press l / h to selectBasic Menu 2/2 Bspeaker LevelPress n to select Check OK?, then press l / h to select Memory back-upAdjust the volume to the desired output level PlaybackBasic operations Select the input sourceRotate Program to select the desired program Front panel operationProgram name Remote control operation To adjust the toneTo listen with headphones Additional operationsSelecting the Multi CH Input Enjoying multi-channel software 7.1 channel surroundAuto Auto Decoders select with l / hPress Standard on the remote control to select the decoder To cancel, press Pure Direct againEnjoying 2-channel software in surround Listening to high fidelity stereo sound With Pure DirectThis adjusts the level of compression Listening to high fidelity stereo sound With Direct StereoNight listening modes Front panel display automatically dimsListening to unprocessed input signals Downmixing to 2 channelsVirtual Cinema DSP Playing video sources BackgroundSelecting input modes Displaying information about the input SourceDTS AnalogTuning Automatic and manual tuningAutomatic tuning Manual tuningPresetting stations Automatically presetting FM stationsAutomatic preset tuning options Press FM/AM to select the FM bandManually presetting stations Tune into a stationPress Memory MAN’L/AUTO FM Repeat steps 1 through 5 to store other stationsSelecting preset stations Exchanging preset stationsPress and hold PRESET/TUNING Edit for more than 3 seconds Press PRESET/TUNING Edit againReceiving RDS stations Changing the RDS mode Press PTY Seek Mode to set this unit in the PTY Seek mode To exit from the PTY Seek mode, press PTY Seek Mode againPTY Seek function Selected program type appears on the front panel displayTo cancel this function EON functionSpecial considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesDolby Digital SUR. Standard Dolby DigitalSUR. Enhanced SUR. StandardPRO Logic SUR. Standard PRO LogicFor music sources Concert HallJazz Club Rock ConcertSetting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations Press l / h to adjust the speaker output level Canceling the sleep timerControl range is from +10 dB to -10 dB Using the test tone Set AMP/SOURCE/TV to AMP Press TestSET Menu Basic MenuSound Menu Input MenuUsing SET Menu Option MenuUsing Sound Menu Sound Menu 1/3Center SP Front SPSurr B L/R SP LFE/BASS OUTSurround left/right speakers Surr L/R SP Presence speakers Surround back speakers Surr B L/R SPCSP Distance Cross OverSpeaker distance CSP Distance Graphic EQ Dgraphic EQElfe Level Fdynamic RangeGlow FRQ.TEST HHP Tone CtrlIaudio SET Low frequency test Glow FRQ. TestUsing Input Menu Input MenuCMPNT-V Input Optical OUTBinput Mode OpticalCinput Rename CoaxialUsing Option Menu Dmulti CH InputOption MENU1/2 Adisplay SETSpeaker impedance setting Bmemory GuardCPARAM. INI DSP IMP.SETEzone SET FZONE2 SETGZONE3 SET Zone 2 set FZONE2 SETRemote Control Features Control areaControlling this unit Controlling other componentsSetting remote control codes Remote Control Code Default SettingsControlling optional components Optn area Set AMP/SOURCE/TV to SourcePress Learn again to exit from the setup mode Press EnterPress Enter to set the number FunctionPress an input selector button to select a source component To 10 cm 2 to 4Press Learn again to exit the learning mode Press Learn using a ballpoint pen or similar objectLearn appears in the display window Changing source names Display windowPress a macro button Using the Macro featureMacro buttons First Second Third Press Macro using a ballpoint pen or similar object Macro operationsProgramming macro operations Set Macro ON/OFF to on Press a macro buttonPress Clear by using a ballpoint pen or similar object Press k / n to select the clear modeClearing function sets Clear appears in the display windowClearing individual functions Press Clear to exit from the clearing modeClearing a learned function Press Clear to exit the clearing mode Clearing a macro functionPress Learn again to exit Press Macro again to exitControlling each component VCRSystem configuration and connection example Using external amplifiersZone 2/ZONE Zone 2/Zone 3 connectionsTo enable Zone mode on the remote Control Using this unit’s internal amplifierPress Learn to complete the Zone setup To control Zone 2/ZonePress Select k/n to exit from the Zone Zone 3 mode Turning this unit to either on or standbySpecial considerations for DTS software For DVDs encoded with DTSWhat is a sound field? Changing parameter settingsEditing Sound Field Parameters Elements of a sound fieldResetting parameters to the factory values To reset a certain parameterTo reset all parameters Press k / n to select ParametersSound Field Parameter Descriptions INIT. DLY/P. INIT. DLY Initial delayRoom SIZE/P. Room Size Room size INIT. DLY Surround initial delay SB INI. DLY Surround back initial delayRoom Size Surround room size Liveness Surround livenessREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level DIALG.LIFT Dialog lift For 7ch StereoFor DTS Neo6 Music Image Center image For THX Cinema DEC 2ch Decoder SelectTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator Volume level isRecord Volume level Dolby Digital or DTSTuner Remote control Does not work norFunction properly Does not learn newGlossary Audio formatsSound field programs PCM Linear PCMAudio information LFE 0.1 channelSampling frequency and number Quantized bits THX Cinema processingVideo signal information Specifications
Top Page Image Contents