Yamaha RX-V1500 owner manual Sound field programs, PCM Linear PCM

Page 97

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “pulse code modulation”, the analog signal is encoded as pulses and then modulated for recording.

GLOSSARY

Sound field programs

CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers and designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it’s inevitable that there are differences in the sound heard. Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of a movie theater in the listening room of your own home.

SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones.

Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed on headphones.

Virtual CINEMA DSP

YAMAHA has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects without any surround speakers by using virtual surround speakers.

It is even possible to enjoy Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker.

 

INFORMATION

ADDITIONAL

 

 

 

 

 

 

 

English

 

 

 

 

95

Image 97
Contents RX-V1500 Special Instructions for U.K. Model For U.K. customersContents Built-in 7-channel power amplifier FeaturesSound field features Other featuresInstalling batteries in the remote control Supplied accessoriesGetting Started Front panel Controls and FunctionsOpening and closing the front panel Door Europe models onlyRemote control Mute AMP/SOURCE/TVSET Menu NightHandling the remote control Using the remote controlApproximately 6 m 20 ft Front panel display LFE indicator 96/24 indicatorInput channel indicators Presence and surround back speaker indicatorsAC Outlets Rear panelVoltage Selector Speaker placement Speaker SetupDi-pole speaker layout Speaker connections10 mm 3/8 Tighten the knob to secure the wire Connecting to PRESENCE/ZONE 2 or Presence speaker terminalsBanana plug connections Speaker terminal wrench Red positive + Black negativeSUB Woofer Center terminals Front terminalsSurround terminals Subwoofer jackCable indications ConnectionsAnalog jacks Digital jacksConnections for DVD playback Connecting video componentsDVD player A. model Video MonitorFor 6-channel input Connecting to the Multi CH Input jacksMulti-format player External decoder Video AUX jacks on the front panel Connections for other video componentsUse these jacks to connect any video source, such as Game console or camcorder, to this unitConnecting a turntable Connecting audio componentsConnections for audio components Connecting to an external amplifier Connecting the AM loop antenna Connecting the antennasFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapter U.K. model onlyOther models Connecting the power supply cordAsia and General models only Memory back-upTurning on the power Speaker impedance settingPress STANDBY/ON to exit the setting SP IMP . SETOptimizer microphone setup Auto SetupIntroduction Automenu Starting the setupSET Menu If you selected Step in step If you selected Auto in stepIf you selected Reload in step Press n to select Start Push i, then press hBefore auto setup Troubleshooting for auto setup procedureDuring auto setup 1OUT of Phase After auto setup3LEVEL Error 4SWFR PhaseUsing Basic Menu Basic SetupBasic Menu 1/2 Press n to select SWFR, then press l / h to selectBspeaker Level Basic Menu 2/2Press n to select Check OK?, then press l / h to select Memory back-upPlayback Adjust the volume to the desired output levelBasic operations Select the input sourceRotate Program to select the desired program Front panel operationProgram name To adjust the tone Remote control operationTo listen with headphones Additional operationsEnjoying multi-channel software 7.1 channel surround Selecting the Multi CH InputAuto Auto Decoders select with l / hTo cancel, press Pure Direct again Press Standard on the remote control to select the decoderEnjoying 2-channel software in surround Listening to high fidelity stereo sound With Pure DirectListening to high fidelity stereo sound With Direct Stereo This adjusts the level of compressionNight listening modes Front panel display automatically dimsDownmixing to 2 channels Listening to unprocessed input signalsVirtual Cinema DSP Playing video sources BackgroundDisplaying information about the input Source Selecting input modesDTS AnalogAutomatic and manual tuning TuningAutomatic tuning Manual tuningAutomatically presetting FM stations Presetting stationsAutomatic preset tuning options Press FM/AM to select the FM bandTune into a station Manually presetting stationsPress Memory MAN’L/AUTO FM Repeat steps 1 through 5 to store other stationsExchanging preset stations Selecting preset stationsPress and hold PRESET/TUNING Edit for more than 3 seconds Press PRESET/TUNING Edit againReceiving RDS stations Changing the RDS mode To exit from the PTY Seek mode, press PTY Seek Mode again Press PTY Seek Mode to set this unit in the PTY Seek modePTY Seek function Selected program type appears on the front panel displayEON function To cancel this functionRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby Digital Dolby DigitalSUR. Enhanced SUR. StandardSUR. Standard PRO Logic PRO LogicConcert Hall For music sourcesJazz Club Rock ConcertSetting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations Press l / h to adjust the speaker output level Canceling the sleep timerControl range is from +10 dB to -10 dB Set AMP/SOURCE/TV to AMP Press Test Using the test toneBasic Menu SET MenuSound Menu Input MenuOption Menu Using SET MenuSound Menu 1/3 Using Sound MenuCenter SP Front SPLFE/BASS OUT Surr B L/R SPSurround left/right speakers Surr L/R SP Presence speakers Surround back speakers Surr B L/R SPCSP Distance Cross OverSpeaker distance CSP Distance Dgraphic EQ Graphic EQElfe Level Fdynamic RangeHHP Tone Ctrl Glow FRQ.TESTIaudio SET Low frequency test Glow FRQ. TestInput Menu Using Input MenuCMPNT-V Input Optical OUTOptical Binput ModeCinput Rename CoaxialDmulti CH Input Using Option MenuOption MENU1/2 Adisplay SETBmemory Guard Speaker impedance settingCPARAM. INI DSP IMP.SETFZONE2 SET Ezone SETGZONE3 SET Zone 2 set FZONE2 SETControl area Remote Control FeaturesControlling this unit Controlling other componentsRemote Control Code Default Settings Setting remote control codesControlling optional components Optn area Set AMP/SOURCE/TV to SourcePress Enter Press Learn again to exit from the setup modePress Enter to set the number FunctionTo 10 cm 2 to 4 Press an input selector button to select a source componentPress Learn again to exit the learning mode Press Learn using a ballpoint pen or similar objectLearn appears in the display window Display window Changing source namesPress a macro button Using the Macro featureMacro buttons First Second Third Macro operations Press Macro using a ballpoint pen or similar objectProgramming macro operations Set Macro ON/OFF to on Press a macro buttonPress k / n to select the clear mode Press Clear by using a ballpoint pen or similar objectClearing function sets Clear appears in the display windowClearing individual functions Press Clear to exit from the clearing modeClearing a learned function Clearing a macro function Press Clear to exit the clearing modePress Learn again to exit Press Macro again to exitVCR Controlling each componentUsing external amplifiers System configuration and connection exampleZone 2/ZONE Zone 2/Zone 3 connectionsUsing this unit’s internal amplifier To enable Zone mode on the remote ControlPress Learn to complete the Zone setup To control Zone 2/ZoneTurning this unit to either on or standby Press Select k/n to exit from the Zone Zone 3 modeSpecial considerations for DTS software For DVDs encoded with DTSChanging parameter settings What is a sound field?Editing Sound Field Parameters Elements of a sound fieldTo reset a certain parameter Resetting parameters to the factory valuesTo reset all parameters Press k / n to select ParametersSound Field Parameter Descriptions INIT. DLY/P. INIT. DLY Initial delayRoom SIZE/P. Room Size Room size SB INI. DLY Surround back initial delay INIT. DLY Surround initial delayRoom Size Surround room size Liveness Surround livenessREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For 7ch Stereo DIALG.LIFT Dialog liftFor DTS Neo6 Music Image Center image For THX Cinema DEC 2ch Decoder SelectGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level is Or DTS indicatorRecord Volume level Dolby Digital or DTSTuner Does not work nor Remote controlFunction properly Does not learn newAudio formats GlossaryPCM Linear PCM Sound field programsLFE 0.1 channel Audio informationSampling frequency and number Quantized bits THX Cinema processingVideo signal information Specifications