Yamaha RX-V1500 owner manual To control Zone 2/Zone, To enable Zone mode on the remote Control

Page 83

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

Using this unit’s internal amplifier

To use this unit’s internal amplifier, set ZONE2 AMP to ON in SET MENU (see page 67).

R L

+

PRESENCE/ ZONE 2

This unit

Remote controlling Zone 2/Zone 3

The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room.

Second room

To control Zone 2/Zone 3

1Press SELECT k repeatedly to display “ZONE 2” or “ZONE 3” in the display window.

SELECT

To enable Zone mode on the remote

control

You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/

– to control the selected room.

1Repeat steps 1 through 3 of the procedure in “Setting remote control codes” on page 69.

2Press l / h to select “L:AMP”.

ENTER

or

2Press SYSTEM POWER to turn Zone 2 or Zone 3 power on.

3Press an input selector button to select the input source you want to listen to in the second/third room.

The display window shows “2: name of selected

input” or “3: name of selected input” if the remote control is in the Zone 2/Zone 3 mode.

3Press ENTER.

“2000” appears in the display window.

4Enter the code number “2001”.

5Press ENTER to set the number.

“OK” appears in the display window if setting was successful.

6Press LEARN to complete the Zone setup.

The remote control will be able to operate this unit from Zone 2 or Zone 3.

A

B

INPUT MODE

SLEEP

PHONO

TUNER

CD

MULTI CH IN

V-AUX

CBL/SAT

MD/TAPE

CD-R

DTV

VCR 1

DVR/VCR2

DVD

Note

Signals input to V-AUX and PHONO jacks cannot be sent to Zone 2/Zone 3.

LEARN

English

81

Image 83
Contents RX-V1500 Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 7-channel power amplifier Sound field featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Front panel Controls and FunctionsOpening and closing the front panel Door Europe models onlyRemote control Night AMP/SOURCE/TVMute SET MenuApproximately 6 m 20 ft Using the remote controlHandling the remote control Front panel display Presence and surround back speaker indicators 96/24 indicatorLFE indicator Input channel indicatorsVoltage Selector Rear panelAC Outlets Speaker placement Speaker Setup10 mm 3/8 Speaker connectionsDi-pole speaker layout Speaker terminal wrench Red positive + Black negative Connecting to PRESENCE/ZONE 2 or Presence speaker terminalsTighten the knob to secure the wire Banana plug connectionsSUB Woofer Subwoofer jack Front terminalsCenter terminals Surround terminalsDigital jacks ConnectionsCable indications Analog jacksA. model Video Monitor Connecting video componentsConnections for DVD playback DVD playerMulti-format player External decoder Connecting to the Multi CH Input jacksFor 6-channel input Game console or camcorder, to this unit Connections for other video componentsVideo AUX jacks on the front panel Use these jacks to connect any video source, such asConnections for audio components Connecting audio componentsConnecting a turntable Connecting to an external amplifier 75-ohm/300-ohm antenna adapter U.K. model only Connecting the antennasConnecting the AM loop antenna Frequency Step switch Asia and General models onlyMemory back-up Connecting the power supply cordOther models Asia and General models onlySP IMP . SET Speaker impedance settingTurning on the power Press STANDBY/ON to exit the settingIntroduction Auto SetupOptimizer microphone setup SET Menu Starting the setupAutomenu Press n to select Start Push i, then press h If you selected Auto in stepIf you selected Step in step If you selected Reload in stepDuring auto setup Troubleshooting for auto setup procedureBefore auto setup 4SWFR Phase After auto setup1OUT of Phase 3LEVEL ErrorPress n to select SWFR, then press l / h to select Basic SetupUsing Basic Menu Basic Menu 1/2Memory back-up Basic Menu 2/2Bspeaker Level Press n to select Check OK?, then press l / h to selectSelect the input source Adjust the volume to the desired output levelPlayback Basic operationsProgram name Front panel operationRotate Program to select the desired program Additional operations Remote control operationTo adjust the tone To listen with headphonesDecoders select with l / h Selecting the Multi CH InputEnjoying multi-channel software 7.1 channel surround Auto AutoListening to high fidelity stereo sound With Pure Direct Press Standard on the remote control to select the decoderTo cancel, press Pure Direct again Enjoying 2-channel software in surroundFront panel display automatically dims This adjusts the level of compressionListening to high fidelity stereo sound With Direct Stereo Night listening modesPlaying video sources Background Listening to unprocessed input signalsDownmixing to 2 channels Virtual Cinema DSPAnalog Selecting input modesDisplaying information about the input Source DTSManual tuning TuningAutomatic and manual tuning Automatic tuningPress FM/AM to select the FM band Presetting stationsAutomatically presetting FM stations Automatic preset tuning optionsRepeat steps 1 through 5 to store other stations Manually presetting stationsTune into a station Press Memory MAN’L/AUTO FMPress PRESET/TUNING Edit again Selecting preset stationsExchanging preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving RDS stations Changing the RDS mode Selected program type appears on the front panel display Press PTY Seek Mode to set this unit in the PTY Seek modeTo exit from the PTY Seek mode, press PTY Seek Mode again PTY Seek functionEON function To cancel this functionRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby DigitalSUR. Standard Dolby Digital SUR. EnhancedSUR. Standard PRO Logic PRO LogicRock Concert For music sourcesConcert Hall Jazz ClubAdvanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer Control range is from +10 dB to -10 dB Canceling the sleep timerPress l / h to adjust the speaker output level Set AMP/SOURCE/TV to AMP Press Test Using the test toneInput Menu SET MenuBasic Menu Sound MenuOption Menu Using SET MenuFront SP Using Sound MenuSound Menu 1/3 Center SPSurround back speakers Surr B L/R SP Surr B L/R SPLFE/BASS OUT Surround left/right speakers Surr L/R SP Presence speakersSpeaker distance CSP Distance Cross OverCSP Distance Fdynamic Range Graphic EQDgraphic EQ Elfe LevelLow frequency test Glow FRQ. Test Glow FRQ.TESTHHP Tone Ctrl Iaudio SETOptical OUT Using Input MenuInput Menu CMPNT-V InputCoaxial Binput ModeOptical Cinput RenameAdisplay SET Using Option MenuDmulti CH Input Option MENU1/2DSP IMP.SET Speaker impedance settingBmemory Guard CPARAM. INIZone 2 set FZONE2 SET Ezone SETFZONE2 SET GZONE3 SETControlling other components Remote Control FeaturesControl area Controlling this unitSet AMP/SOURCE/TV to Source Setting remote control codesRemote Control Code Default Settings Controlling optional components Optn areaFunction Press Learn again to exit from the setup modePress Enter Press Enter to set the numberTo 10 cm 2 to 4 Press an input selector button to select a source componentLearn appears in the display window Press Learn using a ballpoint pen or similar objectPress Learn again to exit the learning mode Display window Changing source namesMacro buttons First Second Third Using the Macro featurePress a macro button Set Macro ON/OFF to on Press a macro button Press Macro using a ballpoint pen or similar objectMacro operations Programming macro operationsClear appears in the display window Press Clear by using a ballpoint pen or similar objectPress k / n to select the clear mode Clearing function setsClearing a learned function Press Clear to exit from the clearing modeClearing individual functions Press Macro again to exit Press Clear to exit the clearing modeClearing a macro function Press Learn again to exitVCR Controlling each componentZone 2/Zone 3 connections System configuration and connection exampleUsing external amplifiers Zone 2/ZONETo control Zone 2/Zone To enable Zone mode on the remote ControlUsing this unit’s internal amplifier Press Learn to complete the Zone setupFor DVDs encoded with DTS Press Select k/n to exit from the Zone Zone 3 modeTurning this unit to either on or standby Special considerations for DTS softwareElements of a sound field What is a sound field?Changing parameter settings Editing Sound Field ParametersPress k / n to select Parameters Resetting parameters to the factory valuesTo reset a certain parameter To reset all parametersRoom SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions Liveness Surround liveness INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Room Size Surround room sizeREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time For THX Cinema DEC 2ch Decoder Select DIALG.LIFT Dialog liftFor 7ch Stereo For DTS Neo6 Music Image Center imageGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onDolby Digital or DTS Or DTS indicatorVolume level is Record Volume levelTuner Does not learn new Remote controlDoes not work nor Function properlyAudio formats GlossaryPCM Linear PCM Sound field programsTHX Cinema processing Audio informationLFE 0.1 channel Sampling frequency and number Quantized bitsVideo signal information Specifications