Yamaha RX-V1500 Resetting parameters to the factory values, Press k / n to select Parameters

Page 86

EDITING SOUND FIELD PARAMETERS

4Press k / n to select the

parameters.

ENTER

5Press l / h to change the parameter value.

When you set a parameter to a value other than the factory preset, an asterisk mark (*) appears by the parameter name on the video monitor.

ENTER

6Repeat steps 3 through 5 as necessary to change other program parameters.

Notes

•The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, press k / n.

•You cannot change parameter values when MEMORY GUARD is set to “ON”. If you want to change the parameter values, set MEMORY GUARD to “OFF” (see page 66).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

■Resetting parameters to the factory values

To reset a certain parameter

Select the parameter you want to reset, then press l / h repeatedly until the asterisk mark (*) next to the parameter name disappears from the video monitor.

To reset all parameters

Use PARAM.INI (see page 66).

84

Image 86

Contents RX-V1500 For U.K. customers Special Instructions for U.K. ModelContents Sound field features FeaturesBuilt-in 7-channel power amplifier Other featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Controls and Functions Front panelEurope models only Opening and closing the front panel DoorRemote control SET Menu AMP/SOURCE/TVMute NightApproximately 6 m 20 ft Using the remote controlHandling the remote control Front panel display Input channel indicators 96/24 indicatorLFE indicator Presence and surround back speaker indicatorsVoltage Selector Rear panelAC Outlets Speaker Setup Speaker placement10 mm 3/8 Speaker connectionsDi-pole speaker layout Banana plug connections Connecting to PRESENCE/ZONE 2 or Presence speaker terminalsTighten the knob to secure the wire Speaker terminal wrench Red positive + Black negativeSUB Woofer Surround terminals Front terminalsCenter terminals Subwoofer jackAnalog jacks ConnectionsCable indications Digital jacksDVD player Connecting video componentsConnections for DVD playback A. model Video MonitorMulti-format player External decoder Connecting to the Multi CH Input jacksFor 6-channel input Use these jacks to connect any video source, such as Connections for other video componentsVideo AUX jacks on the front panel Game console or camcorder, to this unitConnections for audio components Connecting audio componentsConnecting a turntable Connecting to an external amplifier Frequency Step switch Asia and General models only Connecting the antennasConnecting the AM loop antenna 75-ohm/300-ohm antenna adapter U.K. model onlyAsia and General models only Connecting the power supply cordOther models Memory back-upPress STANDBY/ON to exit the setting Speaker impedance settingTurning on the power SP IMP . SETIntroduction Auto SetupOptimizer microphone setup SET Menu Starting the setupAutomenu If you selected Reload in step If you selected Auto in stepIf you selected Step in step Press n to select Start Push i, then press hDuring auto setup Troubleshooting for auto setup procedureBefore auto setup 3LEVEL Error After auto setup1OUT of Phase 4SWFR PhaseBasic Menu 1/2 Basic SetupUsing Basic Menu Press n to select SWFR, then press l / h to selectPress n to select Check OK?, then press l / h to select Basic Menu 2/2Bspeaker Level Memory back-upBasic operations Adjust the volume to the desired output levelPlayback Select the input sourceProgram name Front panel operationRotate Program to select the desired program To listen with headphones Remote control operationTo adjust the tone Additional operationsAuto Auto Selecting the Multi CH InputEnjoying multi-channel software 7.1 channel surround Decoders select with l / hEnjoying 2-channel software in surround Press Standard on the remote control to select the decoderTo cancel, press Pure Direct again Listening to high fidelity stereo sound With Pure DirectNight listening modes This adjusts the level of compressionListening to high fidelity stereo sound With Direct Stereo Front panel display automatically dimsVirtual Cinema DSP Listening to unprocessed input signalsDownmixing to 2 channels Playing video sources BackgroundDTS Selecting input modesDisplaying information about the input Source AnalogAutomatic tuning TuningAutomatic and manual tuning Manual tuningAutomatic preset tuning options Presetting stationsAutomatically presetting FM stations Press FM/AM to select the FM bandPress Memory MAN’L/AUTO FM Manually presetting stationsTune into a station Repeat steps 1 through 5 to store other stationsPress and hold PRESET/TUNING Edit for more than 3 seconds Selecting preset stationsExchanging preset stations Press PRESET/TUNING Edit againReceiving RDS stations Changing the RDS mode PTY Seek function Press PTY Seek Mode to set this unit in the PTY Seek modeTo exit from the PTY Seek mode, press PTY Seek Mode again Selected program type appears on the front panel displayTo cancel this function EON functionSpecial considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesSUR. Enhanced Dolby DigitalSUR. Standard Dolby Digital SUR. StandardPRO Logic SUR. Standard PRO LogicJazz Club For music sourcesConcert Hall Rock ConcertAdvanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer Control range is from +10 dB to -10 dB Canceling the sleep timerPress l / h to adjust the speaker output level Using the test tone Set AMP/SOURCE/TV to AMP Press TestSound Menu SET MenuBasic Menu Input MenuUsing SET Menu Option MenuCenter SP Using Sound MenuSound Menu 1/3 Front SPSurround left/right speakers Surr L/R SP Presence speakers Surr B L/R SPLFE/BASS OUT Surround back speakers Surr B L/R SPSpeaker distance CSP Distance Cross OverCSP Distance Elfe Level Graphic EQDgraphic EQ Fdynamic RangeIaudio SET Glow FRQ.TESTHHP Tone Ctrl Low frequency test Glow FRQ. TestCMPNT-V Input Using Input MenuInput Menu Optical OUTCinput Rename Binput ModeOptical CoaxialOption MENU1/2 Using Option MenuDmulti CH Input Adisplay SETCPARAM. INI Speaker impedance settingBmemory Guard DSP IMP.SETGZONE3 SET Ezone SETFZONE2 SET Zone 2 set FZONE2 SETControlling this unit Remote Control FeaturesControl area Controlling other componentsControlling optional components Optn area Setting remote control codesRemote Control Code Default Settings Set AMP/SOURCE/TV to SourcePress Enter to set the number Press Learn again to exit from the setup modePress Enter FunctionPress an input selector button to select a source component To 10 cm 2 to 4Learn appears in the display window Press Learn using a ballpoint pen or similar objectPress Learn again to exit the learning mode Changing source names Display windowMacro buttons First Second Third Using the Macro featurePress a macro button Programming macro operations Press Macro using a ballpoint pen or similar objectMacro operations Set Macro ON/OFF to on Press a macro buttonClearing function sets Press Clear by using a ballpoint pen or similar objectPress k / n to select the clear mode Clear appears in the display windowClearing a learned function Press Clear to exit from the clearing modeClearing individual functions Press Learn again to exit Press Clear to exit the clearing modeClearing a macro function Press Macro again to exitControlling each component VCRZone 2/ZONE System configuration and connection exampleUsing external amplifiers Zone 2/Zone 3 connectionsPress Learn to complete the Zone setup To enable Zone mode on the remote ControlUsing this unit’s internal amplifier To control Zone 2/ZoneSpecial considerations for DTS software Press Select k/n to exit from the Zone Zone 3 modeTurning this unit to either on or standby For DVDs encoded with DTSEditing Sound Field Parameters What is a sound field?Changing parameter settings Elements of a sound fieldTo reset all parameters Resetting parameters to the factory valuesTo reset a certain parameter Press k / n to select ParametersRoom SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions Room Size Surround room size INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Liveness Surround livenessREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time For DTS Neo6 Music Image Center image DIALG.LIFT Dialog liftFor 7ch Stereo For THX Cinema DEC 2ch Decoder SelectTroubleshooting GeneralOnly the speaker on Sound suddenlyGoes off One side can beRecord Volume level Or DTS indicatorVolume level is Dolby Digital or DTSTuner Function properly Remote controlDoes not work nor Does not learn newGlossary Audio formatsSound field programs PCM Linear PCMSampling frequency and number Quantized bits Audio informationLFE 0.1 channel THX Cinema processingVideo signal information Specifications