Yamaha RX-V1500 Bmemory Guard, Cparam. Ini, Dsp Imp.Set, Parameter initialization CPARAM. INI

Page 68

SET MENU

Video conversion V CONV.

Use this feature to turn on/off conversion of composite (VIDEO) signals to both S-video and component signals. This allows you to output converted video signals from the S VIDEO or COMPONENT VIDEO jacks when no S-video or component signals are input. This feature also converts S-video signals to component signals when no component signals are input.

Choices: ON, OFF

Select “OFF” not to convert any signals.

Select “ON” to convert composite signals to S-video and component signals, and to convert S-video signals to component signals.

Notes

Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (composite or S-video) between each component.

When converting composite video or S-video signals from a VCR to component video signals, the picture quality may suffer depending on your VCR.

Component OSD CMPNT OSD

Use this feature to turn on/off OSD output to the COMPONENT VIDEO MONITOR OUT jacks when using SET MENU, the test tone or the parameter functions.

Choices: ON, OFF

Select “ON” to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks.

Select “OFF” if you do not want to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks.

Note

SET MENU functions even when “OFF” is selected.

Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON

B)MEMORY GUARD

[OFF ON

p/p :

Exit

</> :

Select

Select “ON” to protect:

DSP program parameters

All SET MENU items

All speaker levels

The on-screen display (OSD) mode

Note

When MEMORY GUARD is set to “ON”, you cannot use the test tone or select any other SET MENU items.

Parameter initialization C)PARAM. INI

Use this feature to initialize the parameters for each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.

Press the corresponding numeric button for the sound field program that you want to initialize.

An asterisk (*) next to a program number means that the parameter values have been changed from their initial settings.

C)PARAM. INI

1 2 3 *4

*5 6 7 8

9*0

Notes

You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.

You cannot separately initialize individual sound field programs.

You cannot initialize any program groups when MEMORY GUARD is set to ON.

Speaker impedance setting

D)SP IMP.SET

Use to select the impedance of your speakers. Choices: 6ohms, 8ohms

D)SP IMP.SET

Minimum 8ohms

p/p :

Exit

</> :

Select

66

Image 68
Contents RX-V1500 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 7-channel power amplifierSound field features Other featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Controls and Functions Front panelEurope models only Opening and closing the front panel DoorRemote control AMP/SOURCE/TV MuteSET Menu NightApproximately 6 m 20 ft Using the remote controlHandling the remote control Front panel display 96/24 indicator LFE indicatorInput channel indicators Presence and surround back speaker indicatorsVoltage Selector Rear panelAC Outlets Speaker Setup Speaker placement10 mm 3/8 Speaker connectionsDi-pole speaker layout Connecting to PRESENCE/ZONE 2 or Presence speaker terminals Tighten the knob to secure the wireBanana plug connections Speaker terminal wrench Red positive + Black negativeSUB Woofer Front terminals Center terminalsSurround terminals Subwoofer jackConnections Cable indicationsAnalog jacks Digital jacksConnecting video components Connections for DVD playbackDVD player A. model Video MonitorMulti-format player External decoder Connecting to the Multi CH Input jacksFor 6-channel input Connections for other video components Video AUX jacks on the front panelUse these jacks to connect any video source, such as Game console or camcorder, to this unitConnections for audio components Connecting audio componentsConnecting a turntable Connecting to an external amplifier Connecting the antennas Connecting the AM loop antennaFrequency Step switch Asia and General models only 75-ohm/300-ohm antenna adapter U.K. model onlyConnecting the power supply cord Other modelsAsia and General models only Memory back-upSpeaker impedance setting Turning on the powerPress STANDBY/ON to exit the setting SP IMP . SETIntroduction Auto SetupOptimizer microphone setup SET Menu Starting the setupAutomenu If you selected Auto in step If you selected Step in stepIf you selected Reload in step Press n to select Start Push i, then press hDuring auto setup Troubleshooting for auto setup procedureBefore auto setup After auto setup 1OUT of Phase3LEVEL Error 4SWFR PhaseBasic Setup Using Basic MenuBasic Menu 1/2 Press n to select SWFR, then press l / h to selectBasic Menu 2/2 Bspeaker LevelPress n to select Check OK?, then press l / h to select Memory back-upAdjust the volume to the desired output level PlaybackBasic operations Select the input sourceProgram name Front panel operationRotate Program to select the desired program Remote control operation To adjust the toneTo listen with headphones Additional operationsSelecting the Multi CH Input Enjoying multi-channel software 7.1 channel surroundAuto Auto Decoders select with l / hPress Standard on the remote control to select the decoder To cancel, press Pure Direct againEnjoying 2-channel software in surround Listening to high fidelity stereo sound With Pure DirectThis adjusts the level of compression Listening to high fidelity stereo sound With Direct StereoNight listening modes Front panel display automatically dimsListening to unprocessed input signals Downmixing to 2 channelsVirtual Cinema DSP Playing video sources BackgroundSelecting input modes Displaying information about the input SourceDTS AnalogTuning Automatic and manual tuningAutomatic tuning Manual tuningPresetting stations Automatically presetting FM stationsAutomatic preset tuning options Press FM/AM to select the FM bandManually presetting stations Tune into a stationPress Memory MAN’L/AUTO FM Repeat steps 1 through 5 to store other stationsSelecting preset stations Exchanging preset stationsPress and hold PRESET/TUNING Edit for more than 3 seconds Press PRESET/TUNING Edit againReceiving RDS stations Changing the RDS mode Press PTY Seek Mode to set this unit in the PTY Seek mode To exit from the PTY Seek mode, press PTY Seek Mode againPTY Seek function Selected program type appears on the front panel displayTo cancel this function EON functionSpecial considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesDolby Digital SUR. Standard Dolby DigitalSUR. Enhanced SUR. StandardPRO Logic SUR. Standard PRO LogicFor music sources Concert HallJazz Club Rock ConcertAdvanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer Control range is from +10 dB to -10 dB Canceling the sleep timerPress l / h to adjust the speaker output level Using the test tone Set AMP/SOURCE/TV to AMP Press TestSET Menu Basic MenuSound Menu Input MenuUsing SET Menu Option MenuUsing Sound Menu Sound Menu 1/3Center SP Front SPSurr B L/R SP LFE/BASS OUTSurround left/right speakers Surr L/R SP Presence speakers Surround back speakers Surr B L/R SPSpeaker distance CSP Distance Cross OverCSP Distance Graphic EQ Dgraphic EQElfe Level Fdynamic RangeGlow FRQ.TEST HHP Tone CtrlIaudio SET Low frequency test Glow FRQ. TestUsing Input Menu Input MenuCMPNT-V Input Optical OUTBinput Mode OpticalCinput Rename CoaxialUsing Option Menu Dmulti CH InputOption MENU1/2 Adisplay SETSpeaker impedance setting Bmemory GuardCPARAM. INI DSP IMP.SETEzone SET FZONE2 SETGZONE3 SET Zone 2 set FZONE2 SETRemote Control Features Control areaControlling this unit Controlling other componentsSetting remote control codes Remote Control Code Default SettingsControlling optional components Optn area Set AMP/SOURCE/TV to SourcePress Learn again to exit from the setup mode Press EnterPress Enter to set the number FunctionPress an input selector button to select a source component To 10 cm 2 to 4Learn appears in the display window Press Learn using a ballpoint pen or similar objectPress Learn again to exit the learning mode Changing source names Display windowMacro buttons First Second Third Using the Macro featurePress a macro button Press Macro using a ballpoint pen or similar object Macro operationsProgramming macro operations Set Macro ON/OFF to on Press a macro buttonPress Clear by using a ballpoint pen or similar object Press k / n to select the clear modeClearing function sets Clear appears in the display windowClearing a learned function Press Clear to exit from the clearing modeClearing individual functions Press Clear to exit the clearing mode Clearing a macro functionPress Learn again to exit Press Macro again to exitControlling each component VCRSystem configuration and connection example Using external amplifiersZone 2/ZONE Zone 2/Zone 3 connectionsTo enable Zone mode on the remote Control Using this unit’s internal amplifierPress Learn to complete the Zone setup To control Zone 2/ZonePress Select k/n to exit from the Zone Zone 3 mode Turning this unit to either on or standbySpecial considerations for DTS software For DVDs encoded with DTSWhat is a sound field? Changing parameter settingsEditing Sound Field Parameters Elements of a sound fieldResetting parameters to the factory values To reset a certain parameterTo reset all parameters Press k / n to select ParametersRoom SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions INIT. DLY Surround initial delay SB INI. DLY Surround back initial delayRoom Size Surround room size Liveness Surround livenessREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time DIALG.LIFT Dialog lift For 7ch StereoFor DTS Neo6 Music Image Center image For THX Cinema DEC 2ch Decoder SelectTroubleshooting GeneralSound suddenly Goes offOnly the speaker on One side can beOr DTS indicator Volume level isRecord Volume level Dolby Digital or DTSTuner Remote control Does not work norFunction properly Does not learn newGlossary Audio formatsSound field programs PCM Linear PCMAudio information LFE 0.1 channelSampling frequency and number Quantized bits THX Cinema processingVideo signal information Specifications