Rear Panel Switches and Terminals
2.2 Rear Panel Switches and Terminals
This paragraph explains the functions of the rear panel switches and termi- nals. Figure 2±1 shows their locations.
Changing Switch Settings
Always disconnect power when changing the switch settings.
Figure 2±1. Rear Panel
(DC IN)
(SW1)
(SW3)
(SW4)
(SW2) (VR1)
(DC IN/
(LENS)SYNC)
2.2.1Shutter Speed Control Switch SW1
Switch SW1 sets the electronic shutter speed. Table 2±1 shows the shutter speed settings.
Table 2±1. Shutter Speed Control Switch SW1
Setting No. | Shutter Speed |
Setting No. | Shutter Speed |
01/500
51/3000
11/750
61/4000
21/1000
71/8000
31/1500
8 | not used |
41/2000
9 | not used |
2.2.2External Synchronization Terminal Resistance Switch SW4
Switch SW4 sets the resistance of the external synchronization terminal. Table 2±2 lists the settings.
Nomenclature and Use of Each Component |