DC IN/SYNC Terminal
-The odd fields are low and the even fields are high for the pin 1 field index output.
-The pin 5 image signal is provided for
-The dc voltage output from pin 6 is the same as the input voltage.
2.2.8DC IN/SYNC Terminal
This terminal supplies the +12 V power, outputs the image from the camera module, and inputs/outputs sync signals, through cable connector HR10A±10P±12S. Table 2±7 lists the terminal pins, signals, and levels.
Table 2±7. DC IN/SYNC Terminal
Pin No. | Input/Output Signal | Signal Level |
1 | GND |
|
2 | DC + 12V |
|
3 | Image output (GND) |
|
4 | Image output (signal) |
|
5 | HD input/output |
|
6 | HD input (signal) | For HCT14 |
| HD output (signal) | For HC125 |
7 | VD input (signal) | For HCT14 |
| VD output (signal) | For HC125 |
8 | Optional output (GND) |
|
9 | Optional output (signal) | For HC126 |
10GND
11DC + 12V
12VD input/output (GND)
-The optional outputs on pins 8 and 9 select shutter monitor output or pixel clock output.
Nomenclature and Use of Each Component |