Texas Instruments MC-780PIx manual Important Notice

Page 49

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (ªCRITICAL APPLICATIONSº). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK.

In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.

Copyright 1998, Texas Instruments Incorporated

Image 49
Contents MC-780PIx CCD Camera Users Guide Important Notice About This Manual Read This FirstIf you want to Contact Texas Instruments at If You Need AssistanceContents Precautions for Use Initial SettingsSpecifications Exterior DimensionsFigures ±12 TablesOverview Main Features Other FeaturesMain Features Other Features Overview Nomenclature and Use of Each Component Focus Ring Mounting SystemMounting Holes a Mounting Hole BShutter Speed Control Switch SW1 Rear Panel Switches and Terminals±1. Shutter Speed Control Switch SW1 External Synchronization Terminal Resistance Switch SW4Mode Switches SW3 ±2. External Synchronization Terminal Resistance Switch SW4±3. Mode Switches SW3 Gain Mode Switch SW2Gain Variable Volume Control VR1 ±5. Gain Mode Switch SW2DC in Terminal Lens TerminalDC IN/SYNC Terminal Pin No Input/Output Signal Signal Level±7. DC IN/SYNC Terminal Sync Signal HD/VD Input/Output Switch SW1 Internal Switches±8. Sync Signal HD/VD Input/Output Switch SW1 Option Output Switch S1Gamma Switch SW1 ±9. Option Output Switch S1±10.Gamma Switch SW1 4 AC/DC Output Switch SW4±12.Outline Emphasis Circuit ON/OFF Switch SW2 Outline Emphasis Circuit ON/OFF Switch SW2Switch Position Operation Nomenclature and Use of Each Component External Sync With Interface External Sync With No Interface Using the External Sync ModeExternal Sync With Interlace External Sync Signal Input Conditions±2. External Sync With No Interlace External Sync With No InterlaceUsing the External Sync Mode Using the Shutter Modes ±1. Continuous Shutter Speed-Control Timing Continuous Shutter±2. Random Shutter Control Timing Fixed V Sync Random Shutter Fixed V Sync±3. Random Shutter Control Timing V Sync Reset Random Shutter V Sync Reset±4. VI Mode Shutter Timing VI Mode Shutter±1. Line Table Corresponding to Shutter Speeds Precautionary ItemsShutter Speed MC-7890PIA MC-780PIH Modes and Initial Switch Settings Initial SettingsTopic ±1. Modes and Initial Switch Settings Modes and Initial Switch SettingsPrecautions for Use Maintenance Precautions for UsePower Source Precautions for UseHeat Reduction Locations for Use and StorageMaintenance Precautions for Use Image System Optical Elements and Other Specifications Specifications±2. MC±780PIH Image System Specifications ±1. MC±780PIA Image System SpecificationsSpecification Image System±3. Optical Elements and Other Specifications Optical Elements and Other SpecificationsSpecifications Exterior Dimensions Exterior Dimensions ±1. Exterior Dimensions Exterior Dimensions Connectors Other IssuesConnectors Important Notice