Random Shutter (Fixed V Sync)
4.2 Random Shutter (Fixed V Sync)
On the rear panel mode switch SW3, set switch 1 to ON and switch 2 to OFF. Use the shutter speed control switch SW1 to set the shutter speed.
The random shutter operates only when the shutter command has been added, so continuous shutter is the normal operating mode.
Figure 4±2 shows the random shutter speed control timing with fixed V sync.
Figure 4±2. Random Shutter Control Timing (Fixed V Sync)
Shutter command |
|
| Output interruption |
|
Read out
1 Field
Field indicator output
249 μs (PIA)
142 μs (PIH)
Shutter monitor output
Using the Shutter Modes |