Texas Instruments MC-780PIx manual Important Notice

Page 2

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (ªCRITICAL APPLICATIONSº). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK.

In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.

Copyright 1998, Texas Instruments Incorporated

Image 2
Contents MC-780PIx CCD Camera Users Guide Important Notice Read This First About This ManualIf You Need Assistance If you want to Contact Texas Instruments atContents Specifications Initial SettingsPrecautions for Use Exterior DimensionsFigures Tables ±12Main Features Other Features OverviewMain Features Other Features Overview Nomenclature and Use of Each Component Mounting Holes a Mounting SystemFocus Ring Mounting Hole B±1. Shutter Speed Control Switch SW1 Rear Panel Switches and TerminalsShutter Speed Control Switch SW1 External Synchronization Terminal Resistance Switch SW4±3. Mode Switches SW3 ±2. External Synchronization Terminal Resistance Switch SW4Mode Switches SW3 Gain Mode Switch SW2DC in Terminal ±5. Gain Mode Switch SW2Gain Variable Volume Control VR1 Lens Terminal±7. DC IN/SYNC Terminal Pin No Input/Output Signal Signal LevelDC IN/SYNC Terminal ±8. Sync Signal HD/VD Input/Output Switch SW1 Internal SwitchesSync Signal HD/VD Input/Output Switch SW1 Option Output Switch S1±10.Gamma Switch SW1 ±9. Option Output Switch S1Gamma Switch SW1 4 AC/DC Output Switch SW4Switch Position Operation Outline Emphasis Circuit ON/OFF Switch SW2±12.Outline Emphasis Circuit ON/OFF Switch SW2 Nomenclature and Use of Each Component Using the External Sync Mode External Sync With Interface External Sync With No InterfaceExternal Sync Signal Input Conditions External Sync With InterlaceExternal Sync With No Interlace ±2. External Sync With No InterlaceUsing the External Sync Mode Using the Shutter Modes Continuous Shutter ±1. Continuous Shutter Speed-Control TimingRandom Shutter Fixed V Sync ±2. Random Shutter Control Timing Fixed V SyncRandom Shutter V Sync Reset ±3. Random Shutter Control Timing V Sync ResetVI Mode Shutter ±4. VI Mode Shutter TimingShutter Speed MC-7890PIA MC-780PIH Precautionary Items±1. Line Table Corresponding to Shutter Speeds Topic Initial SettingsModes and Initial Switch Settings Modes and Initial Switch Settings ±1. Modes and Initial Switch SettingsPrecautions for Use Precautions for Use MaintenanceHeat Reduction Precautions for UsePower Source Locations for Use and StorageMaintenance Precautions for Use Specifications Image System Optical Elements and Other SpecificationsSpecification ±1. MC±780PIA Image System Specifications±2. MC±780PIH Image System Specifications Image SystemOptical Elements and Other Specifications ±3. Optical Elements and Other SpecificationsSpecifications Exterior Dimensions Exterior Dimensions ±1. Exterior Dimensions Exterior Dimensions Other Issues ConnectorsConnectors Important Notice