PRELIMINARY
3.7 TDI Length Selection
TDI length selection for the 2K/4KTDI LVDS camera can be selected using the combination of TDISEL0 and TDISEL1 input signal into the DB15 control connector.
The TDISEL0 and TDISEL1 are LVDS level signals. They are typically wired to the user control I/O of the frame grabber.
For 2K / 4KTDI LVDS cameras, the TDI lengths are available for 96, 64, 32 and 16. They are programmed a follows:
TDI LENGTH | TDISEL1 | TDISEL0 |
96 | HIGH | HIGH (Default Setting) |
64 | HIGH | LOW |
32 | LOW | HIGH |
16 | LOW | LOW |
HIGH = Logic 1
LOW = Logic 0
For 2KTDI LVDS camera, the TDI lengths are available for 96, 64, 48 and 32. They are programmed a follows:
TDI LENGHT | TDISEL1 | TDISEL0 |
96 | HIGH | HIGH (Default Setting) |
64 | HIGH | LOW |
48 | LOW | HIGH |
32 | LOW | LOW |
HIGH = Logic 1
LOW = Logic 0
Fairchild Imaging •