NETWORK SETUP
The 67139 allows you to view your DVR through the Internet. This is especially useful for remote security monitoring.
What you will need to set up The
DVR Online
You will need:
•The DVR connected to a router.
•The router connected to the Inter- net.
•A PC or laptop that is connected to the same router as the DVR.
•A compatible web browser (instruc- tions were developed with a com- mon web browser , other brows- ers may not be compatible).
•A genuine and fully updated version of Windows XP or Vista.
Note: The computer and DVR need to be connected to the same router. The computer is required at the location to view the DVR for initial set up, but is not needed for remote access once the unit is set up and working prop- erly.
Connecting Your DVR to the
Router
1.Power off the DVR by removing the power cable from the back of the DVR.
2.Connect the network cable (sold separately) to the back of the DVR in the Ethernet port.
3.Connect the other end of the network cable to an available port on the router. The port should be labeled
Power on the DVR by reconnecting the power cable on the back of the DVR.
5.A green light should light up on the back of the DVR at the Ethernet con- nection and also at the port on the router.
Finding your DVR’s Internal IP
Address
By default, the DVR IP mode is set to Static. Changing the Static to DHCP, will cause the DVR to automatically retrieve an IP address from the con- nected router. Unless your network requires a static IP address, leave the DVR IP Allocation set as DHCP.
To retrieve the address information:
a. Press Menu.
b. Move the cursor next to Network Setup and press Select.
REV 10h
SKU 67139 | For technical questions, please call | Page 15 |