c.Check that the “IP Allocation” is set to DHCP.
d.Write down your IP address, sub- net Mask, Gateway and HTTP Port (default is 80). This information will be used in the next few steps to view the DVR on your computer and the Internet.
e.Go to the User Setup menu and write down the admin ID and admin password. The default is “admin” and “111111”.
Note: If your router does not support DHCP, contact your network admin- istrator to supply you with your IP information. If the DVR needs to store PPPoE (DSL/ADSL) settings, contact your ISP (Internet Service Provider) for the proper settings.
Preparing Your Computer for
Viewing the DVR
Installing Software
1.Insert Software CD into your com- puter’s
2.Open the CD directory.
3.Double click on “DxClient 2.7.1- ENG”.
4.Run the “Install” program.
Follow the setup wizard to finish the installation.
Adding DVR to Trusted Sites
Every computer that is accessing the DVR will need to be configured to download and run ActiveX con- trols. This is a one time change and only needs to be made on the com- puter that is accessing the DVR. This can be done by changing your web browser settings so it only affects websites that you specifically add to the trusted sites list. Or you can change the setting for all websites. It is recommended that you only change the setting for your trusted sites.
CAUTION: Lowering the safety settings of your computer can open your com- puter up to viruses. Do this at your own risk.
To add the DVR’s IP address to the Trusted Sites on a common web browser:
1.Open your web browser.
The Software CD includes a PC view- | 2. |
er program for the DVR (DxClient | 3. |
2.7.1). This program is for backing up |
video files and remote access. You | 4. | |
may also need to change the security | ||
| ||
settings of the web browser. |
|
To install the PC Viewer program:
Click on TOOLS.
Click on INTERNET OPTIONS.
Click on SECURITY Tab.
REV 10h
SKU 67139 | For technical questions, please call | Page 16 |