7.Type in the IP address of the DVR in the following format:
HTTP://129.168.1.108
Note: The bold underlined numbers are your IP address and will be different from the numbers shown in the above example.
8.If “Require server verification (https:) for all sites” is selected you will need to uncheck the selection box.
9.Click ADD.
10.Close window.
To change the default setting for the TRUSTED SITES zone to low, on the Main Settings:
1.Click on DEFAULT LEVEL.
2.Change security level of the zone to “Low” by sliding the slider to the bot- tom.
3.This will allow ActiveX controls from the DVR to be downloaded and the DVR to be viewed on the computer.
4.Click APPLY.
5.Click OK.
You should now see the connected cameras on the computer screen in the DxClient backup program. Follow the instructions for “Backup Program” to use the software.
Viewing Your DVR
Outside of Your Network
Once you have successfully set up and viewed your DVR through a router, you are now able to set up your router to view the DVR while at a remote location. This process is called Port Forwarding. Port Forward- ing is required if you want to view the DVR from a computer that is not connected to the same router. This process opens a path on your home/ business network to allow you to view your DVR video feed from outside your network (over the Internet).
There are many makes and models of routers. You will need to follow the instructions from your router’s manu- facturer for port forwarding. Consult online sources or have a qualified computer technician complete this task if needed.
Once you have successfully set up port forwarding from the modem where the DVR is located, you will be prompted to enter your user name (default: admin), password (de- fault:111111) and install ActiveX con- trols. You will now be able to view the DVR from any PC in the world with internet access and proper computer settings.
REV 10h
SKU 67139 | For technical questions, please call | Page 17 |