This menu also has the
SENSOR RECORD TIME
1.In the Sensor Setup 
, 
] to select “Sensor Record Time”.
2.Press [SEL] to increase, or STOP 
to decrease, the number of seconds to record once the sensor is activat- ed. The recording time can be set to 5, 10, 15, 20, 25 or 30 seconds.
ALARM ON TIME
1.In the Sensor Setup 
, 
] to select “Alarm on Time”.
2.Press [SEL] to switch between the following options:
a.CONT - The alarm will sound once the motion sensor is activated and will continue until any key is pressed on the DVR or remote.
b.OFF - No alarm will sound.
c.# - The alarm will sound for the num- ber of seconds indicated. The alarm can be set to 5, 10, 15, 20, 25 or 30 seconds. Press [SEL] to increase, or
[STOP] to decrease the number.
MOTION DETECTOR SETUP
motion detector setup
CH1 | ON | Level | 2 | Area |
CH2 | ON | Level | 2 | Area |
CH3 | ON | Level | 2 | Area |
CH4 | ON | Level | 2 | Area |
(
)MOVE ( SEL)SELECT (MENU)ESC
This
1.In the Sensor Setup 
, 
] to select “Motion Detector Setup”.
2.Press [SEL] to enter the Motion De- tector Setup
3.Press the arrow keys [
, 
, 
and 
] to move between the channels and the options for each. Press [SEL] button to change the settings for each option. The options and settings are:
a.On/Off - Use the [SEL] button to toggle between enabling (On) or dis- abling (Off) motion detection record- ing for each channel.
b.Level - Use the [SEL] button to set the sensitivity level from 1 (lowest) to 3 (highest).
c.Area - Use the [SEL] button to enter this
SKU 67139 | For technical questions, please call | Page 21 |