If your modem/router supports DHCP functions, you can use DHCP mode. If you set your IP Allocation to DHCP mode you do not set the IP Address, Subnet Mask or Gateway.
If you set your IP Allocation to Static mode, you will need to setup the fol- lowing IP Address, Subnet Mask and Gateway settings manually.
IP ADDRESS
Set up your IP setting according to the actual network connected to the DVR. Consult your modem/router for your IP address.
To adjust the setting:
3.Press [
] or [
] to move to the number to change.
4.Press the arrow keys [
, 
] to change the number.
5.Press [SEL] to accept the change.
6.Press STOP 
to delete a number.
7.Press REC 
to insert a number.
8.Press [MENU] to save and return to previous menu.
Note: Before using your web browser to view the program over the network,
you may need to change the security settings and enable all ActiveX func- tions.
SUBNET MASK
The Subnet Mask is the identifying number used to determine where an IP address belongs on a local area network. Consult your modem/router for your LAN’s subnet mask.
Follow the same steps as for chang- ing the IP Address numbers to make any changes to the Subnet Mask.
GATEWAY
Set this number to the gateway set by your modem/router, provided by your internet service provider.
SKU 67139 | For technical questions, please call | Page 28 |