IMAGE PARAMETERS | PASSWORD ENABLE |
In the Image Parameters
1.In the Miscellaneous Setup sub- menu, press the arrow keys [
, 
] to select “Image Parameters”.
2.Press [SEL] to enter the image so you can edit the parameters.
3.
Press [
] or [
] buttons to select one of the following settings, then press [
] or [
] to adjust the levels.
CON: Contrast
BRI: Brightness
HUE: Hue
SAT: Saturation
4.Press [MENU] to save and return to the previous menu.
You will always need the current password to format the hard drive, to reset the menu, or to access the customer port. To access other parts of the system, you can enable or dis- able the password. To turn password access on or off:
1.In the Miscellaneous Setup sub- menu, press the arrow keys [
, 
] to select “Password Enable”.
2.Press [SEL] to toggle between “on” and “off”.
KEYPAD TONES
Some models have a buzzer sound available for the [SEL] button. If equipped, to set the buzzer sound for the [SEL] button to on or off:
REV 10d
SKU 67139 | For technical questions, please call | Page 25 |