Samsung SC-D381 user manual Viewing the Demonstration Demonstration

VIEWING THE DEMONSTRATION (DEMONSTRATION)

•Demonstration automatically shows you the major functions that are included with

your camcorder so that you may use them more easily.	CARD	TAPE	MODE
• The demonstration function may only be used in the Camera mode without a tape	(SC-D383/D385 only)
inserted in the camcorder. ➥page 18
• Before you begin: Make sure that there is no tape inserted in the camcorder.
➥page 34
• The demonstration operates repeatedly until the demonstration mode is switched off.

1.Set the Select switch to TAPE. (SC-D383/D385 only)

2.Press the MODE button to set Camera ( ).

3.Press the MENU button.

•The menu list will appear.

4.Move the Joystick (▲ / ▼) up or down to select "System", then press the Joystick or move the Joystick ()to the right.

5.Move the Joystick (▲ / ▼) up or down to select "Demonstration", then press the Joystick.

6.Move the Joystick (▲ / ▼) up or down to select "On", then press the Joystick.

7.Press the MENU button.

•The demonstration will begin.

8.To quit the demonstration, press the MENU button.

•The demonstration function is automatically activated when the camcorder is left idle for more than 10 minutes after switching to the Camera mode (if no tape is inserted in the camcorder).

•If you press other buttons (MENU, Joystick, EASY.Q...) during the demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

•The demonstration mode displays in 4:3 aspect ratio on the LCD screen.

Camera Mode
System
Clock Set		� On
Remote
Beep Sound		� On
Shutter Sound		� On
Language		� English
Demonstration		� On
Move	Select	MENU Exit
Camera Mode
System
Clock Set
Remote
Beep Sound
Shutter Sound
Language		Off
Demonstration		✔ On

Move Select MENU Exit

SAMSUNG Camcorder is...

34x Optical Zoom

1200x Digital Zoom

Multi-Visual Effect

Demonstration

English _29