CUTTING WIND NOISE (WINDCUT PLUS)
•The windcut plus function works in both Camera and Player (Audio dubbing) modes. ➥page 18
•Use the windcut plus when recording in windy places such as the beach or near buildings.
•The windcut plus function minimizes wind or other noises while recording.
-When the windcut plus is on, some low pitched tones are eliminated along with the sound of the wind.
1.Set the Select switch to TAPE.
2.Press the MODE button to set Camera ( 
) or Player ( 
).
3.Press the MENU button.
•The menu list will appear
4.Move the Joystick (▲ / ▼) up or down to select "Record", then press the Joystick or move the Joystick () to the right.
5.Move the Joystick (▲ / ▼) up or down to select "WindCut Plus", then press the Joystick.
6.To activate the windcut plus function, move the Joystick (▲ / ▼) up or down to select the windcut plus type, then press the Joystick.
•"Off": Disables the function
•"Auto": Minimizes the wind noise while preserving voices.
•"On": Removes the low pitched wind noise.
7.To exit, press the MENU button.
•WindCut Plus ( "On" ( 
) or "Auto" ( 
)) indicator is displayed.
Make sure windcut plus is set to off when you want the microphone to be as sensitive as possible.
CARD | TAPE | MODE |
| ||
|
| BATT. |
BATT.
Camera Mode |
| |
Record |
|
|
Rec Mode |
| |
Audio Mode |
| |
WindCut Plus | Off | |
Real Sterco | Auto | |
|
| ✔ On |
Move | Select | MENU Exit |
STBY SP | 0:00:30 |
16:9 Wide 10Sec | 60min |
| S 16Bit |
| C.Nite 1/30 |
English _45