Setting the File Number (File No.)
•File number setting works only in M.Cam mode. ➥page 18
•File numbers are given to images in the order they were recorded when they are stored on the memory card.
•File numbers may be set as follows:
-"Series": When there are existing files, the new image will be named as the next number in the sequence.
-"Reset": When there are no files stored on the memory card, the file numbering starts from 0001.
CARD | TAPE | MODE |
1.Set the Select switch to Card.
2.Press the MODE button to set Camera ( 
).
3.Press the MENU button.
• The menu list will appear.
4.Move the Joystick (▲ / ▼) up or down to select "Memory", then press the Joystick.
5.Move the Joystick (▲ / ▼) up or down to select "File No.", then press the Joystick.
6.Move the Joystick (▲ / ▼) up or down to select the desired option "Series" or "Reset", then press the Joystick.
7.To exit, press the MENU button.
M.Cam Mode |
| |
Memory |
| |
File No. |
| � Series |
Move | Select | MENU Exit |
M.Cam Mode |
| |
Memory |
| |
File No. |
| ✔ Series |
|
| Reset |
Move | Select | MENU Exit |
When you set "File No." to "Series", each file is assigned with a different number so as to avoid duplicating file names. It is convenient when you want to manage your files on a PC.
English _75