Samsung SC-D381 Connecting to a TV that has no Audio/Video Input Jacks, Play back the tape

Connecting to a TV that has no Audio/Video Input Jacks

•You can connect your camcorder to a TV through a VCR.

1.Connect the camcorder to your VCR with the Audio/Video cable.

• The yellow jack: Video

	• The white jack: Audio(L) - mono	VCR
2.	• The red jack: Audio(R)
	Connect a TV to the VCR.
3.	Set the Select switch to TAPE.
	(SC-D383/D385 only)
4.	Press the MODE button to set Player (	).

5.Turn on both the TV and VCR.

• Set the input selector on the VCR to line.	TV
• Select the channel reserved for your VCR
on the TV set.
6. Play the tape.
Play back the tape	Antenna

Camcorder

AV DV

AV Jack

MODE

POWER

CHG

Signal flow

Audio/Video Cable

1.Connect a power source.

2.Insert the tape you wish to play back.

3.Set the Select switch to TAPE. (SC-D383/D385 only)

4.Press the MODE button to set Player ( ).

5.Move the Joystick (/) left or right, find the first position you wish to play back.

6.Press the Joystick.

•The images you recorded will appear on the TV after a few seconds.

•If a tape reaches its end while being played back, the tape will rewind automatically.

7.To stop the playback, move the Joystick down (▼).

•The playback mode (SP/LP) is selected automatically.

•If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

English _69