initial setting:display menu setting
DISPLAYING THE DATE / TIME (DATE / TIME)
•The date/time function works in Camera / Player / M.Cam / M.Player modes. ➥page 18
•The date and time are automatically recorded on a special data area of the tape.
1.Set the Select switch to CARD or TAPE.
2.Press the MODE button to set Camera ( ) or Player ( ).
3.Press the MENU button.
•The menu list will appear.
4.Move the Joystick (▲ / ▼) up or down to select "Display", then press the Joystick or move the Joystick ()to the right.
5.Move the Joystick (▲ / ▼) up or down to select "Date/Time", then press the Joystick.
6.Move the Joystick (▲ / ▼) up or down to select the date/time display type, then press the Joystick.
•Date/Time display types: "Off", "Date", "Time", "Date&Time".
7.To exit, press the MENU button.
•On charging the built-in rechargeable battery
Your camcorder has a
The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the
any data that you have input will not be backed up and the date/time appears on the screen as "12:00 AM JAN. 1.2008" (when "Date/Time" display is set to "On").
•The date/time will read "12:00 AM JAN. 1.2008" in the following conditions:
-When the
-If the movie or photo recording was made before setting the date/time in the miniDV camcorder.
•The DATE/TIME button exists on the remote control as well.
CARD | TAPE | MODE |
| ||
|
| BATT. |
BATT.
Camera Mode |
|
Display | � Off |
Guideline | |
LCD Bright |
|
LCD Color | � Off |
Date/Time | |
TV Display | � On |
Move | Select | MENU Exit |
Camera Mode |
| |
Display |
|
|
Guideline |
| |
LCD Bright |
| |
LCD Color | ✔ Off | |
Date/Time | Date | |
TV Display | Time | |
|
| Date&Time |
Move | Select | MENU Exit |
32_ English