![](/images/new-backgrounds/1318044/318044125x1.webp)
Setting the Digital Image Stabilizer (DIS)
•The DIS function works only in Camera mode. ➥page 18
•DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits).
•It provides more stable pictures when:
-Recording with the zoom
-Recording a small object
-Recording and walking at the same time
-Recording through the window of a vehicle
1.Set the Select switch to TAPE.
2.Press the MODE button to set Camera ( ).
3.Press the MENU button.
•The menu list will appear.
4.Move the Joystick (▲ / ▼) up or down to select "Camera", then press the Joystick or move the Joystick () to the right.
5.Move the Joystick (▲ / ▼) up or down to select "DIS", then press the Joystick.
6.To activate the DIS function, move the Joystick (▲ / ▼) up or down to select "On", then press the Joystick.
•If you do not want to use the DIS function, set the "DIS" menu to "Off".
7.To exit, press the MENU button.
•DIS ( ) indicator is displayed.
•EASY.Q mode automatically sets the "DIS" to "On".
•You cannot set the following functions in the DIS mode.
:"Mosaic", "Mirror", "Emboss2", "Pastel1", "Pastel2", "C.Nite", "Digital Zoom"
•Setting the DIS function in 16:9 Wide mode may produce lower quality than in normal mode.
•It is recommended that you deactivate the DIS function when using a tripod.
•If you use the DIS function, the picture quality may deteriorate.
CARD | TAPE | MODE |
Camera Mode |
| |
Camera |
|
|
Program AE | � Auto | |
White Balance | � Auto | |
Visual Effect | � Off | |
16:9 Wide | � On | |
Macro |
| � Off |
DIS |
| � Off |
Move | Select | MENU Exit |
Camera Mode |
| |
Camera |
|
|
Program AE |
| |
White Balance |
| |
Visual Effect |
| |
16:9 Wide |
| |
Macro |
| Off |
DIS |
| ✔ On |
Move | Select | MENU Exit |
| STBY SP | 0:00:10 |
16:9 Wide | 10Sec | 60min |
|
| S 16BIt |
M 1/50 | No Tape ! |
| |
29 |
|
W | T |
12:00 1.JAN.2008 | C.Nite 1/30 |
English _55