Connecting to Your TV, Reducing pixellation

Connecting to Your TV

You can connect the receiver to any standard television with RCA composite video inputs.

Television with standard RCA composite inputs (maximum 32 inches diagonal recommended)

Audio (white)

Video (yellow)

AV out

AC adapter (already connected)

To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link. This method is optimized for wireless connections, but it can cause an indented image line (“ghosting” or JPEG artifacts) on larger television displays or plasma screens.

Reducing pixellation

When video is put on a very large screen, you can often see the edges of each pixel in the image. There are a few ways to reduce the amount of pixellation on your TV:

►Zoom out on the receiver: at the zoomed in size, some pixellation will always occur.

►Don't use a television larger than 32 inches (32-inch diagonal display).

►Don't use a "stretch" or "zoom" setting on your television; set your television to display the image as it receives it from the system.