Uniden UDW-10003 user manual Changing to a Different Camera, No Signal

Page 14

Changing to a Different Camera

►On the receiver, press to cycle through the enabled channels from CAM1 through CAM4. After the last enabled channel, the receiver goes back to the first camera.

1

2

3

4

►Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no camera signal on a particular channel, the receiver shows a black screen with the message No Signal.

1

2

3

4

NO SIGNAL

►You should only turn a channel On if you have a camera paired to that channel.

►The receiver skips any channels that are set to Off in the menu.

1

2

3

4

(Channel CAM2 set to Off.)

14

Image 14

Contents What’s in the Box If You Contact Uniden’s Phone NumberImportant Safety Instructions Contents Charge the batteries Connect the PowerGetting Started TryCheck the Video Signal Icon What it meansWhat the buttons do Learning Your SystemGet to Know the Camera What the lights meanUsing the camera mount Mounting Camera screw brace Post Lock Screw holesGet to Know the Receiver SpeakerConnector Use it to What the connections doUsing the Menu RightUsing Zoom Mode Understanding Night VisionConnecting to Your TV Reducing pixellationSome things to know about pairing cameras Multiple Camera FeaturesPairing Cameras No Signal Changing to a Different CameraSetting Up a Scan Using Quad Display To enter quad displaySolving Problems If… TryPossible Cause Solution Unstable or Weak SignalWeak signal and video performance Noise or Static Resetting Your System Resetting the camera Resetting the receiverSystem Specifications Camera Receiver Product SpecificationsImage Specification Additional InformationPolymer-Lithium Battery Warning Recycling and Disposal InformationCE Compliance Information FCC Compliance InformationIC Compliance Information One-year Limited Warranty